Engineers Australia Skills Assessment

EngrCyAlex

@nashmacoy101 said:

@EngrCyAlex said:

@silverbullet said:

@EngrCyAlex said:
Hi po. San page po ba sa msa booklet nakaindicate kung sino po pwede magsign nung detailed job description? Parang may nabasa kase ako na pwede kahit colleague lang as long as he can vouch for you.

Meron nakaindicate doon sir, endorsed by manager/supervisor/hr

Kase ang ipprovide ko is standard COE signed by HR and affidavit with detailed job description. Yung affidavit pwede colleague lang magsign?
alam ko as long as mas mataas position nya sa'yo like SR position/Team Lead etc.

Pwede po kahit di ko immediate supervisor?

EngrCyAlex

May nabasa po kasi ako na ganito sa kabilang forum.

silverbullet

@EngrCyAlex said:

May nabasa po kasi ako na ganito sa kabilang forum.

I’m sorry can’t help you with this. Kasi un sa akin ay mismong nag endorsed.

Nag request ako sa previous company ko and lucky mabait naman sila and ayun within 2weeks naprovide na sa akin kaagad. Try nyo po magrequest.

GreyM

@cacophony said:

@nashmacoy101 said:
May naka experience na po ba dito na tinanggap ng EA ung experience as comparable sa occupation pero hindi inaccept ng DoHA?
Hi bro! Musta? Halos same pala tayo ng timeline. Going on my 3rd year of waiting this September. Nagsubmit na ako ng request for duplicate letter kahapon sa EA since 3 years lang validity ng Skills Assessment on the face of DoHA. May invite ka na?

@cacophony, tingin mo may bearing yung english proficiency mo sa INVITE prospect mo kaya ng take ka ulit? Or more on years of work experience? Will they tell us if the EOI fails? Thanks. 🙂

GreyM

@cacophony disclaimer lang po nagsisimula pa lang kami and basa basa pa lang. Gathering info. Thank you. 🙂

GreyM

Definitely not a requirement. The PRC only helps when institution is under section 2 as far as skills assessment and migration is concerned. We’ve handled x amount of clients without a licence. Not all engineers are required to have licence. You can still claim work experience without licence as long as your institution is under section 1.

Please help me understand. If school falls under category 3, Bachelor's Degree will not be recognized unless PRC licensed. If school falls under Category 1, no license needed for Bachelors Degree to be recognized. Iba pa pong factor altogether ang work experience? Or work experience is tied up with the recognition of Bachelor's Degree? Hence,

1.) Category 1: Bachelor's Degree only (PRC license not needed for degree to be recognized)

2.) Work Experience

1.) Category 2/3: Should be PRC licensed (for degree to be recognized)

2.) Work Experience

Thank you. Sorry medyo na-confuse po ako. 🙂

silverbullet

@GreyM said:

Definitely not a requirement. The PRC only helps when institution is under section 2 as far as skills assessment and migration is concerned. We’ve handled x amount of clients without a licence. Not all engineers are required to have licence. You can still claim work experience without licence as long as your institution is under section 1.
Please help me understand. If school falls under category 3, Bachelor's Degree will not be recognized unless PRC licensed. If school falls under Category 1, no license needed for Bachelors Degree to be recognized. Iba pa pong factor altogether ang work experience? Or work experience is tied up with the recognition of Bachelor's Degree? Hence,
1.) Category 1: Bachelor's Degree only (PRC license not needed for degree to be recognized)
2.) Work Experience
Or
1.) Category 2/3: Should be PRC licensed (for degree to be recognized)
2.) Work Experience
Thank you. Sorry medyo na-confuse po ako. 🙂

If you fall into level 2/3 school and no prc license, you will be assessed as adV diploma sa knila. Kung makaprovide ka ng PRC, recognize nila ito as AQF bachelor degree.

Yung experience, meron nag share previously, kung wala ka daw prc license pero nag fall sya sa lvl 1 school, then hindi nacredit un work exp nya. Yun ung pag kakaintindi ko po. 😹😹😹 wait tyo sa iba.

GreyM

@silverbullet thanks! hahahahaha kakompyus o baka kulang lang ako sa backread. hahahaha. mahirap pala pag walang licensure exams ung engineering degree tapos category 3 ang school.

EngrCyAlex

@silverbullet said:

@EngrCyAlex said:

May nabasa po kasi ako na ganito sa kabilang forum.
I’m sorry can’t help you with this. Kasi un sa akin ay mismong nag endorsed.
Nag request ako sa previous company ko and lucky mabait naman sila and ayun within 2weeks naprovide na sa akin kaagad. Try nyo po magrequest.

Ah. Ok po. Sa standard coe po kase wala ako prob. Nakakakuha naman po. Ang prob ko yung affidavit. Huhu. Pag yung immediate supervisor ko kasi may attitude at di kagandahan ugali baka magtaka kung para san yung affidavit at hindi pirmahan. 😔

silverbullet

@GreyM said:
@silverbullet thanks! hahahahaha kakompyus o baka kulang lang ako sa backread. hahahaha. mahirap pala pag walang licensure exams ung engineering degree tapos category 3 ang school.

True.mahirap. Kahit nun ako nahirapan kht lvl 1 at meron prc haha. Pinaulit un cdr at ss. So un. Buti maraming mabait tlg dito! 🙂

silverbullet

@EngrCyAlex said:

@silverbullet said:

@EngrCyAlex said:

May nabasa po kasi ako na ganito sa kabilang forum.

I’m sorry can’t help you with this. Kasi un sa akin ay mismong nag endorsed.
Nag request ako sa previous company ko and lucky mabait naman sila and ayun within 2weeks naprovide na sa akin kaagad. Try nyo po magrequest.
Ah. Ok po. Sa standard coe po kase wala ako prob. Nakakakuha naman po. Ang prob ko yung affidavit. Huhu. Pag yung immediate supervisor ko kasi may attitude at di kagandahan ugali baka magtaka kung para san yung affidavit at hindi pirmahan. 😔

Hirap nga yun gnyn sir. Try nyo gumawa ng draft tpos hingiin nyo nlng sa knya un pirma at letterhead. Gnyn ginwa ko sa akin. Formal ako nag asked and sinabi ko ung reason tlg haha kht itong current company na pinag tatarsbahuhan ko . 😹😹😹

GreyM

@Silverbullet, oo nga eh. i think pinakamadugo ung CDR. nagkalkal ako ng mga pinamigay na papel sa amin during our orientation sa company namin but that was ten years ago pa. and mag babasa pa lang ako nung guidelines sa EA website on how to craft the CDR. ang problema ko lang is, ang gusto ko sanang applyan is Professional Engineer (electrical engineer) pero sa semiconductor ako ngwowork. Tapos may napanood pa misis ko sa youtube kagabi na vlog na kailangan daw ng tatlong projects na idescribe sa CDR. gusto ko na nga mag give up naooverwhelm ako pero naisip ko naman un ngang mag asawang vloggers, 3 and 5 years work experience lng and di hamak na mas bata sa akin pero nasa australia na. i think kaya ko naman. un na lang naisip ko.

silverbullet

@GreyM said:
@Silverbullet, oo nga eh. i think pinakamadugo ung CDR. nagkalkal ako ng mga pinamigay na papel sa amin during our orientation sa company namin but that was ten years ago pa. and mag babasa pa lang ako nung guidelines sa EA website on how to craft the CDR. ang problema ko lang is, ang gusto ko sanang applyan is Professional Engineer (electrical engineer) pero sa semiconductor ako ngwowork. Tapos may napanood pa misis ko sa youtube kagabi na vlog na kailangan daw ng tatlong projects na idescribe sa CDR. gusto ko na nga mag give up naooverwhelm ako pero naisip ko naman un ngang mag asawang vloggers, 3 and 5 years work experience lng and di hamak na mas bata sa akin pero nasa australia na. i think kaya ko naman. un na lang naisip ko.

You can do it. 🙂 pde yung thesis sa univ kung meron kapa. Haha.

Kung need nyo ng assistance or coaching sa pag gawa, 🙂 i would like to recommend @MumVeng haha. She helped me. 1 week rewriting ng cdr ko. Ayun swak. Sobrang swak.

Goodluck po.

GreyM

@silverbullet, thank you sa encouragement. hingi ako tulong kay MumVeng in time. tenkyu maam! hiya pa ako sa ngayon hehehehe. balangkas muna and then sulat katawan ng CDR. subok lang ng subok ng walang pagsisihan. 🙂

DerylC

Hello po, ask lang po if nag provide ako ng career episodes, CE 1 from my thesis, CE 2 and 3 from my work experience, hinihingi pa po ba nila ung copy ng thesis if ever?

Thanks po

GreyM

Ask ko lang sana, electrical engineer ang degree and license pero parang mas nagfifit sa experience ang Production or Plant Engineer:

PRODUCTION OR PLANT ENGINEER – ANZSCO 233513

Description

Plans, directs and coordinates the design, construction, modification, continued performance and maintenance of equipment and machines in industrial plants, and the management and planning of manufacturing activities. Registration or licensing may be required.

Skill Level 1

Specialisations:

Automation and Control Engineer

Pwede ba ang match na ito and mas advisable ba na Production/Plant Engineer na lang as opposed to Electrical Engineer na ang description ay malayo na sa job experience. Thanks again. 🙂

silverbullet

@DerylC said:
Hello po, ask lang po if nag provide ako ng career episodes, CE 1 from my thesis, CE 2 and 3 from my work experience, hinihingi pa po ba nila ung copy ng thesis if ever?

Thanks po

Better po meron kayong copy just incase mang hingi. Kasi diba sabi dun sa episode provide pictures, tables etc. Para incase mang hingi sila meron kayo mahugot na proof na kayo ang gumawa especially plagiarism.

MumVeng

@silverbullet said:

@GreyM said:
@Silverbullet, oo nga eh. i think pinakamadugo ung CDR. nagkalkal ako ng mga pinamigay na papel sa amin during our orientation sa company namin but that was ten years ago pa. and mag babasa pa lang ako nung guidelines sa EA website on how to craft the CDR. ang problema ko lang is, ang gusto ko sanang applyan is Professional Engineer (electrical engineer) pero sa semiconductor ako ngwowork. Tapos may napanood pa misis ko sa youtube kagabi na vlog na kailangan daw ng tatlong projects na idescribe sa CDR. gusto ko na nga mag give up naooverwhelm ako pero naisip ko naman un ngang mag asawang vloggers, 3 and 5 years work experience lng and di hamak na mas bata sa akin pero nasa australia na. i think kaya ko naman. un na lang naisip ko.
You can do it. 🙂 pde yung thesis sa univ kung meron kapa. Haha.
Kung need nyo ng assistance or coaching sa pag gawa, 🙂 i would like to recommend @MumVeng haha. She helped me. 1 week rewriting ng cdr ko. Ayun swak. Sobrang swak.
Goodluck po.

Ok lang po sa akin basta may time, Sir. Ang first step po talaga ay basahin ang MSA Booklet. Pag po may hindi kayo naintidihan ask lang po dito sa mga engineers na positive assessment na.

cacophony

@GreyM said:

@cacophony said:

@nashmacoy101 said:
May naka experience na po ba dito na tinanggap ng EA ung experience as comparable sa occupation pero hindi inaccept ng DoHA?

Hi bro! Musta? Halos same pala tayo ng timeline. Going on my 3rd year of waiting this September. Nagsubmit na ako ng request for duplicate letter kahapon sa EA since 3 years lang validity ng Skills Assessment on the face of DoHA. May invite ka na?
@cacophony, tingin mo may bearing yung english proficiency mo sa INVITE prospect mo kaya ng take ka ulit? Or more on years of work experience? Will they tell us if the EOI fails? Thanks. 🙂

Yes bro superior = 20 points. More points, more chances of winning.

cacophony

@GreyM said:
Ask ko lang sana, electrical engineer ang degree and license pero parang mas nagfifit sa experience ang Production or Plant Engineer:

PRODUCTION OR PLANT ENGINEER – ANZSCO 233513
Description
Plans, directs and coordinates the design, construction, modification, continued performance and maintenance of equipment and machines in industrial plants, and the management and planning of manufacturing activities. Registration or licensing may be required.
Skill Level 1
Specialisations:
Automation and Control Engineer
Pwede ba ang match na ito and mas advisable ba na Production/Plant Engineer na lang as opposed to Electrical Engineer na ang description ay malayo na sa job experience. Thanks again. 🙂

Yes bro pwede naman. Though, if I were you, I'd find a way to match my career episodes to the description of an EE. The trend for 2335 nowadays is not so good. Pag EE, more likely na ma-invite agad due to demand.

« Previous Page Next Page »