Engineers Australia Skills Assessment

GreyM

@RheaMARN1171933 said:

@cacophony said:

@GreyM said:
@cacophony ah mataas pala ang demand ng electrical engineers sa aus. sayang naman. medyo challenge lang siguro ung matching kasi eto ang sa EE:

Design, develops, and supervises the manufacture, installation, operation, and maintenance of equipment, machines, and systems for the generation, distribution, utilization, and control of electric power.

layo sa manufacturing. 🙁

Based on my experience ito ha. May kasabayan kasi ako nung 2017 na after a month of lodging his Skilselect, may invite na agad sya while ako still waiting for ITA until now.
Things have evolved since 2017....these days unlikely you’ll get an invite within a month

Ano po ang mga factors na hindi mapipili? or is it just a matter of length of time ng pag aantay pero eventually mapipili din if kumpleto lahat? Thanks po. 🙂

Linetdane

@zekemadr said:
Does DHA certify number of experience?

Paano pong certify?

What I know is DHA will look at your evidence of employments pa din. Usually if may EA na mas madali na sa kanila mareview yung work experience.

RheaMARN1171933

@zekemadr said:

@Linetdane said:

Paano pong certify?

What I know is DHA will look at your evidence of employments pa din. Usually if may EA na mas madali na sa kanila mareview yung work experience.
RSEA

DHA will still check, they have the final say though they give high regards on the assessment outcome, one needs to be mindful that the outcome letter states that it is the assessing authority’s opinion only and the decision for visa eligibility is on DHA

jessejames21

@jakibantiles said:

@jessejames21 said:
Hi Guys,

May I know if there's anyone here who applied for Professional Engineer who is not part of PRC registered courses?
Hi po. Yung husband ko po Bachelor of Technology Major in Mech Eng'g yung tinapos. Hindi kasama sa mga pwedeng mag exam for ME licensure sa PRC. B.Sci (BSME) lang yung pwede. Pero Prof ME 233512 yung ninominate namin na code. Positive outcome naman po.

Hi po. Yung school po ba nya ay nasa 2/3 category? Ang galing so pwede pa pala iassess as Prof Engr, kahit hindi PRC registered ang course. 🙂

jakibantiles

@jessejames21 said:

@jakibantiles said:

@jessejames21 said:
Hi Guys,

May I know if there's anyone here who applied for Professional Engineer who is not part of PRC registered courses?

Hi po. Yung husband ko po Bachelor of Technology Major in Mech Eng'g yung tinapos. Hindi kasama sa mga pwedeng mag exam for ME licensure sa PRC. B.Sci (BSME) lang yung pwede. Pero Prof ME 233512 yung ninominate namin na code. Positive outcome naman po.
Hi po. Yung school po ba nya ay nasa 2/3 category? Ang galing so pwede pa pala iassess as Prof Engr, kahit hindi PRC registered ang course. 🙂

section 1 po.

BhukitBakitBatik

Hello po! Ask ko lang sana kung yun bang CDR eh laging kailangan may ikukuwento kang problema na sinolve mo o pwedeng idescribe lang ang work mo per episode? Thanks sa sasagot po.

EmpiMix12

@jove said:

@zekemadr said:
Hello guys,

My CDR is approved as Civil Engineer. Do I need to have my RSEA from Engineers Australia or DHA can do it?
baka may sample CDR ka ng Civil Engineer, pwede bang humingi as reference lng 🙂..salamat in advance

Hi sir, pwde pahelp ako? Civil Engineer din ako.

silverbullet

@BhukitBakitBatik said:
Hello po! Ask ko lang sana kung yun bang CDR eh laging kailangan may ikukuwento kang problema na sinolve mo o pwedeng idescribe lang ang work mo per episode? Thanks sa sasagot po.

Not really kailangan meron isolve pero meron kasi doon sa summary statement na creative, so mas ok kung meron kang problem solving each episode. By the way, hindi mo ikwekwento un ginagawa mo. Its about how you apply yung course mo/occupation mo. Check your anzco code and check the task there. Apply nyo po iyon. Yung sakin po, ginawa ko ay kinuwento ko rin un mga gingwa ko sa work. Pero pinarewrite sakin ng CO, ito yung comment sakin.

jovelyn

@zekemadr said:

@EmpiMix12 said:

Hi sir, pwde pahelp ako? Civil Engineer din ako.
Shoot your questions here so we can help other civil engineers with the same question. I'm happy to answer it with the best of my knowledge.
@zekemadr baka may sample po kayong CDR for civil engineer pang reference lng po sana. salamat po in advance

Heto po email ko : jove_patricio@yahoo.com

silverbullet

@jovelyn said:

@zekemadr said:

@EmpiMix12 said:

Hi sir, pwde pahelp ako? Civil Engineer din ako.

Shoot your questions here so we can help other civil engineers with the same question. I'm happy to answer it with the best of my knowledge.

@zekemadr baka may sample po kayong CDR for civil engineer pang reference lng po sana. salamat po in advance
Heto po email ko : jove_patricio@yahoo.com

Nag padala na po ako ng sample cdr na meron ako para a civil. hehe good luck to.

jovelyn

@silverbullet said:

@jovelyn said:

@zekemadr said:

@EmpiMix12 said:

Hi sir, pwde pahelp ako? Civil Engineer din ako.

Shoot your questions here so we can help other civil engineers with the same question. I'm happy to answer it with the best of my knowledge.

@zekemadr baka may sample po kayong CDR for civil engineer pang reference lng po sana. salamat po in advance

Heto po email ko : jove_patricio@yahoo.com
Nag padala na po ako ng sample cdr na meron ako para a civil. hehe good luck to.

na received ko na sir, salamat ng marami and good luck din sa u 🙂

jovelyn

@EmpiMix12 said:

@jove said:

@zekemadr said:
Hello guys,

My CDR is approved as Civil Engineer. Do I need to have my RSEA from Engineers Australia or DHA can do it?

baka may sample CDR ka ng Civil Engineer, pwede bang humingi as reference lng 🙂..salamat in advance
Hi sir, pwde pahelp ako? Civil Engineer din ako.

@EmpiMix12 ano email mo pra ma-share ko din sau ang CDR na civil na received ko.

Captain_A

@zekemadr said:
Does DHA certify number of experience?

ilang years ba claim mo?

Captain_A

@BhukitBakitBatik said:
Hello po! Ask ko lang sana kung yun bang CDR eh laging kailangan may ikukuwento kang problema na sinolve mo o pwedeng idescribe lang ang work mo per episode? Thanks sa sasagot po.

based s job description ng occupation mo, need mo ikwento na apply mo sya sa gingawa mo sa work in detail.

Captain_A

@Edwardsq11516 said:
Pa help po. Automation Engineer po ako. At ang working experience ko po is mag-program sa PLC at HMI and itest and commission ang project. BS Instrumentation and Control Engineering po ang tinapos ko. Bali hanggang ngayon di pa po kasama sa PRC ang kurso namin. Pero May certificate lang po kame not sure kung ok na yun or kung hindi. Most of my projects na involved ako ay sa mga Automation Industries like waste and water treatment plant and pump station ni Maynilad at Manila water. Pati mga Food and Beverages Industries like Coca-Cola, Pepsi, San Miguel Corp., PMFTC, Liquigaz , etc. Ang ginagamit po naming software is SIEMENS products(TIA portal), Allen Bradley, and Schneider.

Tanong ko po ay ano po ang pwede kong applyan sa occupation list? Thank you so much!
Advantage sana kung May mga ka kurso ako dito na nasa Australia na. Salamat po!

parang IE or ME ito, not sure though.

Captain_A

@Edwardsq11516 said:
Meron po ba ditong Automation Engineer? Ang ginagawa ko po is nag proprogram using PLC, HMI and SCADA . At ako rin po nagcoconduct ng testing and commissioning sa ginawa nming control system. BS Instrumentation and Control Engineer po ako.May sample po ba kauo na CDR?

see this.

https://deltaimmigration.com.au/Production-or-Plant-Engineer/233513.htm

PRODUCTION OR PLANT ENGINEER

Plans, directs and coordinates the design, construction, modification, continued performance and maintenance of equipment and machines in industrial plants, and the management and planning of manufacturing activities. Registration or licensing may be required.

Skill Level: 1

Specialisation:

Automation and Control Engineer

Captain_A

@hanah said:
Hi! Bago lng po dito ang naghahanap ng idea for cdr as production engineer. May nabasa lng po ako na mahirap daw mabigyan ng ITA yung electrical engineering graduate tapos ang naging profession ay hindi related sa electrical kahit sa manufacturing industry? 7 years as process/maunfacturing engg hindi po sa semicon. Thanks po sa makakasagot. 🙂

check this baka meron saknila

https://pinoyau.info/discussion/10899/group-2335-industrial-mechanical-and-production-engineers

Captain_A

@ericson29 said:

Kailangan po ba may katibayan ka din na nagattend ka ng seminar or meeting or ilalagay mo lng po yung mga nasalihan mo sa isang A4 size?

in my experience wala ako pinasa proof.

Captain_A

@zekemadr said:

@Captain_A said:

@zekemadr said:
Does DHA certify number of experience?

ilang years ba claim mo?
8 years

in my opinion, if confident ka sa work experience mo plus you have sufficient supporting documents, you dont need to have RSEA. you may submit all together sa visa application mo.

BhukitBakitBatik

@silverbullet @Captain_A ah salamat po sa sagot. Kasi wala naman akong projects or problema na sinolve. Karaniwang manggagawa lang po ako. Hehehe. So kuwento ko lang ang work ko pero hindi in general pero specific, using maybe technical knowledge or terms that will demonstrate industry knowledge or experience.

« Previous Page Next Page »