Ad space available
reach us at [email protected].
›
Major update has been completed. Please help to report any abnormality that you are facing (in case there is any) to [email protected] . Thank you for your continued support guys!

Official "Pinoy BIM Users in Australia"

2

Comments

  • Electrical_Engr_CDRElectrical_Engr_CDR Mandaluyong
    Posts: 453Member
    Joined: May 04, 2013
    @thegreatiam15 salamat sa reply. medyo naintidihan ko na. sa palagay ko di ko nankailangan mag aral ng revit arch kasi arch bim modeler ang gumgawa. kailangan ko lang matutunan ilink yung arch model para di ako mag clash.

    back ground ko kasi is pdms 3modeling. navis din ang viewer namin dito.

    may clash check commmand din ba revit?

    Nominated occupation: 233311 Electrical Engineer

    April 2013: ielts S8, W7, R7.5, L6.5 hays :(
    May 2013: started CDR and obtaining docs
    July 2014: Finally issued my CDR
    August 2014: EA asked for update of payment (Outdated application form :( )
    Sepetember 2014: received shortcoming letter (lacked docs)
    November 2014: Re-issued CDR having addressed shortcomings
    December 2014: Received positive outcome :) Prof. Engr (Elec Engr)
    February 2015 : ielts W6.5, R6.5, L6.5 S7.5 bakit ganito?
    May 2015: ielts W6, R8, L8.5, S7.5 susuko na ba ako?
    June 20, 2015: PTE-A L77, R84, W82, S80 God is good :)
    June 21, 2015: Submitted EOI - 65pts
    July 6, 2015: Received ITA
    July 11, 2015: lodged visa application for subclass 189.
    August 7, 2015: Finalised Medicals
    September 18, 2015: Visa Grant :)

  • BenlopezBenlopez Perth
    Posts: 16Member
    Joined: Aug 27, 2015
    @Electrical_Engr_CDR and thegreatiam15 ... salamat po thegreatiam15, very informative pio ang mga sagot nyo... may tanong din po ako... isang beses lang po ba pwede ilagay ang view or plan (i.e. level 1 power layout) sa bawat sheet? papaano po kung dapat kong ipakita sa sheet 1 and sheet 2 ang pareho na view?
  • BenlopezBenlopez Perth
    Posts: 16Member
    Joined: Aug 27, 2015
    @thegreatiam15
    @Electrical_Engr_CDR and thegreatiam15 ... salamat po thegreatiam15, very informative pio ang mga sagot nyo... may tanong din po ako... isang beses lang po ba pwede ilagay ang view or plan (i.e. level 1 power layout) sa bawat sheet? papaano po kung dapat kong ipakita sa sheet 1 and sheet 2 ang pareho na view?
  • BenlopezBenlopez Perth
    Posts: 16Member
    Joined: Aug 27, 2015
    @Electrical_Engr_CDR .
    Nasaan na po kayo ngayun ? nandito na po ba kayo sa Australia or kailan po kayo pupunta dito and saang state?
  • Electrical_Engr_CDRElectrical_Engr_CDR Mandaluyong
    Posts: 453Member
    Joined: May 04, 2013
    @Benlopez andito pa ako sa brunei. naghahanap muna ako trabaho at nag iipon bago punta jan.

    Nominated occupation: 233311 Electrical Engineer

    April 2013: ielts S8, W7, R7.5, L6.5 hays :(
    May 2013: started CDR and obtaining docs
    July 2014: Finally issued my CDR
    August 2014: EA asked for update of payment (Outdated application form :( )
    Sepetember 2014: received shortcoming letter (lacked docs)
    November 2014: Re-issued CDR having addressed shortcomings
    December 2014: Received positive outcome :) Prof. Engr (Elec Engr)
    February 2015 : ielts W6.5, R6.5, L6.5 S7.5 bakit ganito?
    May 2015: ielts W6, R8, L8.5, S7.5 susuko na ba ako?
    June 20, 2015: PTE-A L77, R84, W82, S80 God is good :)
    June 21, 2015: Submitted EOI - 65pts
    July 6, 2015: Received ITA
    July 11, 2015: lodged visa application for subclass 189.
    August 7, 2015: Finalised Medicals
    September 18, 2015: Visa Grant :)

  • thegreatiam15thegreatiam15 Sydney
    Posts: 799Member
    Joined: Jan 07, 2014
    @thegreatiam15
    @Electrical_Engr_CDR and thegreatiam15 ... salamat po thegreatiam15, very informative pio ang mga sagot nyo... may tanong din po ako... isang beses lang po ba pwede ilagay ang view or plan (i.e. level 1 power layout) sa bawat sheet? papaano po kung dapat kong ipakita sa sheet 1 and sheet 2 ang pareho na view?
    duplicate magkaibang title ang floor plan

    e.g.

    P1_1ST STOREY_ELEC_ZONE A
    P2_1ST STOREY_ELEC_ZONE B

    sample lang po ito bossing

    I haven't lost everything except my mind...

  • BenlopezBenlopez Perth
    Posts: 16Member
    Joined: Aug 27, 2015
    @thegreatiam15
    Salamat po...
  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    Kumusta mga BIM expert na papunta at nandito sa Australia. Salamat sa mga nandito sa Forum, Sa mga nagtatanung at sumasagot sa tanung. Basic pa lang alam ko sa Revit kaya mabagal pa ako ngayun ang gamit ko pala Revit Plumbing. Maybe next year we will have FB group for Pinoy BIM user na papunta at nandito na sa Australia. Kailangan ng volunteer na Admin to para sa fb group. Cheers

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    hi @jepoy527. try to subcribe for one month to learn revit online>>>>

    http://www.infiniteskills.com/cad-bim-training/
    try mo rin mag search sa youtube. Most mga magagaling sa revit nag reresearch din sila ng mga tricks sa YouTube at iba pang web site.

    goodluck and God bless..

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    @Electrical_Engr_CDR. Maganda dyan mag aral kung nasa Pinas ka pa at mas mura. Pagaralan mo yung Revit MEP. Mag aral ka rin ng Microsoft Visio points din yun kung maka tyempo ka makapag apply sa telecommunication company or projects. Mag research ka rin sa YouTube mga tricks sa Revit MEP at Visio. Sa Electrical kasi maliban sa plano o layout palaging may schematic diagram. Mag research ka rin ng mga electrical code at standard ng Australia baka mayrun. Cge goodluck and God bless...

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    edited October 2015
    @JJ2AU I recommend na mag aral ka na dyan bago ka pumunta ng Australia. Maghal kasi tuition for revit. Dipende pa sa discipline. Kung baga unahan mo na agad na matuto para may mailagay kana agad sa iyong CV. Cheers

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    edited October 2015
    To all electrical I would recommend matuto ng Revit MEP at Visio.
    Kung walang school dyan para sa discipline puede kayo mag subcribe ng one month or two month online. Then mag download kayo ng Revit student version. Puntahan nyo na lang sa Autodesk site.

    revit: http://www.infiniteskills.com/cad-bim-training/
    viso: http://www.lynda.com/Visio-tutorials/Visio-2013-Essential-Training/374757-2.html

    Visio usually yan ang ginagamit sa mga telecommunication projects combined with AutoCAD. Visio ang pinaka mura na CAD. Mostly madalas gimitin sa paggawa ng diagram.

    kapag tapos na kayo sa infiniteskills or lyndall. Staka kayo mag research sa YouTube ng mga tricks at iba pang tutorial. Cheers.

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • JayVilJayVil Sydney
    Posts: 15Member
    Joined: Apr 13, 2015
    hello po sa lahat. dto n po ako sydney . CE ako by profession pero walang experience sa pinas. balak ko pong magenrol sa tafe ng short courses (3 weeks) REVIT Architecture para lng makapasok sana ng trabaho. Do u think tama ung gagawin kong Revit Archi ang enrollan ko ?
  • thegreatiam15thegreatiam15 Sydney
    Posts: 799Member
    Joined: Jan 07, 2014
    hello po sa lahat. dto n po ako sydney . CE ako by profession pero walang experience sa pinas. balak ko pong magenrol sa tafe ng short courses (3 weeks) REVIT Architecture para lng makapasok sana ng trabaho. Do u think tama ung gagawin kong Revit Archi ang enrollan ko ?
    i suggest take the Revit Struc assuming nakakaintindi ka nang scheduling, quantifying, general assembly, at loading plans then it should be safe para sayo. I would not recommend REVIT ARCH for you.

    I believe for CE's magagaling kayo sa math so formulas shouldnt be an issue para sa mga tulad mo na engineers. : )

    I haven't lost everything except my mind...

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    hello po sa lahat. dto n po ako sydney . CE ako by profession pero walang experience sa pinas. balak ko pong magenrol sa tafe ng short courses (3 weeks) REVIT Architecture para lng makapasok sana ng trabaho. Do u think tama ung gagawin kong Revit Archi ang enrollan ko ?
    Hi Revit Structure na I enroll mo tama yung sabi ni theGreat. Basahin mo din yung building code ng Australia dito. http://services.abcb.gov.au/NCCOnline/Publications/Publications?year=NCCOnline.Web.Models.PublicationYear

    Free puede mo I download or mag print basta for personal use. Kaibiganin mo lahat ng Engineer dyan sa lugar mo para at mabigyan ka ng tamang advise. Network is a must dito. Mag self research ng mga Australian standard sa profession mo. Goodluck, cheers.


    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    hello po sa lahat. dto n po ako sydney . CE ako by profession pero walang experience sa pinas. balak ko pong magenrol sa tafe ng short courses (3 weeks) REVIT Architecture para lng makapasok sana ng trabaho. Do u think tama ung gagawin kong Revit Archi ang enrollan ko ?
    Syanga pala CE Civil Engineer. Kung sa building ang work experience mo okay kunin mo ang Revit pero kung Civil outside the property block ang profession mo like Roadand bridges, Stormwater AutoCAD pa rin ang gamit at 12D at microstation pala.

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • Electrical_Engr_CDRElectrical_Engr_CDR Mandaluyong
    Posts: 453Member
    Joined: May 04, 2013
    @TotoyOZresident salamat sa advice nakapag download na rin ako ng student version. nakapagdownload na rin ako ng mga training videos galing sa pirateby, hehehe. :D .

    Tanong ko lang po nag hahanap ba ng formal qualifications (certificate) ang mga company?

    Nominated occupation: 233311 Electrical Engineer

    April 2013: ielts S8, W7, R7.5, L6.5 hays :(
    May 2013: started CDR and obtaining docs
    July 2014: Finally issued my CDR
    August 2014: EA asked for update of payment (Outdated application form :( )
    Sepetember 2014: received shortcoming letter (lacked docs)
    November 2014: Re-issued CDR having addressed shortcomings
    December 2014: Received positive outcome :) Prof. Engr (Elec Engr)
    February 2015 : ielts W6.5, R6.5, L6.5 S7.5 bakit ganito?
    May 2015: ielts W6, R8, L8.5, S7.5 susuko na ba ako?
    June 20, 2015: PTE-A L77, R84, W82, S80 God is good :)
    June 21, 2015: Submitted EOI - 65pts
    July 6, 2015: Received ITA
    July 11, 2015: lodged visa application for subclass 189.
    August 7, 2015: Finalised Medicals
    September 18, 2015: Visa Grant :)

  • Electrical_Engr_CDRElectrical_Engr_CDR Mandaluyong
    Posts: 453Member
    Joined: May 04, 2013
    Hi, mga boss di ko ma-install yung libraries sa student version. pano kaya to?

    Nominated occupation: 233311 Electrical Engineer

    April 2013: ielts S8, W7, R7.5, L6.5 hays :(
    May 2013: started CDR and obtaining docs
    July 2014: Finally issued my CDR
    August 2014: EA asked for update of payment (Outdated application form :( )
    Sepetember 2014: received shortcoming letter (lacked docs)
    November 2014: Re-issued CDR having addressed shortcomings
    December 2014: Received positive outcome :) Prof. Engr (Elec Engr)
    February 2015 : ielts W6.5, R6.5, L6.5 S7.5 bakit ganito?
    May 2015: ielts W6, R8, L8.5, S7.5 susuko na ba ako?
    June 20, 2015: PTE-A L77, R84, W82, S80 God is good :)
    June 21, 2015: Submitted EOI - 65pts
    July 6, 2015: Received ITA
    July 11, 2015: lodged visa application for subclass 189.
    August 7, 2015: Finalised Medicals
    September 18, 2015: Visa Grant :)

  • thegreatiam15thegreatiam15 Sydney
    Posts: 799Member
    Joined: Jan 07, 2014
    Hi, mga boss di ko ma-install yung libraries sa student version. pano kaya to?
    Friendly version na kelangan mo huehuehue

    I haven't lost everything except my mind...

  • Electrical_Engr_CDRElectrical_Engr_CDR Mandaluyong
    Posts: 453Member
    Joined: May 04, 2013
    @thegreatiam15 ok na pre nainstall ko na ng maayos

    Nominated occupation: 233311 Electrical Engineer

    April 2013: ielts S8, W7, R7.5, L6.5 hays :(
    May 2013: started CDR and obtaining docs
    July 2014: Finally issued my CDR
    August 2014: EA asked for update of payment (Outdated application form :( )
    Sepetember 2014: received shortcoming letter (lacked docs)
    November 2014: Re-issued CDR having addressed shortcomings
    December 2014: Received positive outcome :) Prof. Engr (Elec Engr)
    February 2015 : ielts W6.5, R6.5, L6.5 S7.5 bakit ganito?
    May 2015: ielts W6, R8, L8.5, S7.5 susuko na ba ako?
    June 20, 2015: PTE-A L77, R84, W82, S80 God is good :)
    June 21, 2015: Submitted EOI - 65pts
    July 6, 2015: Received ITA
    July 11, 2015: lodged visa application for subclass 189.
    August 7, 2015: Finalised Medicals
    September 18, 2015: Visa Grant :)

  • JayVilJayVil Sydney
    Posts: 15Member
    Joined: Apr 13, 2015
    @TotoyOZresident salamat sa link. Uunti untihin kong kong basahin. With regards sa xperience, wala po eh. Walang experience sa pinas. Kaso hnd dw pala nagoofer sa tafe ng revit struc, revit arch lng dw.
  • JayVilJayVil Sydney
    Posts: 15Member
    Joined: Apr 13, 2015
    @thegreatiam15 thanks sa input. Wala akong work experience sa pinas eh. Pagkapasa ng board, migrate na. So mahirap. Saka wala rw sa tafe ang revit struc, revit arch lng ang inoofer nila.
  • TotoyOZresidentTotoyOZresident Posts: 1,327Member, Moderator
    Joined: Jun 28, 2011
    @TotoyOZresident salamat sa link. Uunti untihin kong kong basahin. With regards sa xperience, wala po eh. Walang experience sa pinas. Kaso hnd dw pala nagoofer sa tafe ng revit struc, revit arch lng dw.
    Mayrun sa ibang training centre na accredited ng Autodesk. Usually talaga offer ng TAFE ay Arc ng Revit kasi yun ang basic. Specialty na yung other discipline. Search mo sa google mayrun usually 3 to 5 days. Kasi parang kailangan mo muna kumuha ng Arch revit para you know basic tools bago yung specialty na discipline. I recommend hwag kana kumuha ng Arch diresto kana sa discipline mo. Then mag practice ka na lang sa gabi at mag search ng tricks sa Net. good luck and God bless. cheers

    Quotes:
    "Wise men learn from their mistakes, but wiser men learn from the mistakes of others."
    'Success is when you finished what you have started."

    If you’re looking for Church in Canberra ACT Australia and you want to fellowship with Christian Filipino Australian.
    Come and join us in Jesus Is Lord Church Canberra service every Sunday at 10:30AM to 12:30PM
    Where: 53 Georgina Crescent, Kaleen ACT 2617
    (Back of Kaleen Shopping Centre)
    For more information, please PM me or visit

    http://jilcanberra.org.au

    "To God be the glory"

  • BenlopezBenlopez Perth
    Posts: 16Member
    Joined: Aug 27, 2015
    Sana po masagot nyo ito.
    May taga-WA po ba dito sa forum or kakilala kayo?
    Nandito po ako sa WA, naghahanap ng work as Electrical Designer or drafter.. Revit or AutoCAD or Microstation...
  • match_propmatch_prop Sydney
    Posts: 80Member
    Joined: Sep 19, 2013
    Hello mga sir... Nag take na din ako ng Revit class at halos patapos na.. Revit Architecture lang po ang covered ng lessons.. Question: mas ok ba kung mag-enrol na din ako for Revit MEP o kahit hind na? -- kasi baka hindi ko na din pala kailangan kasi Architecture naman talaga background ko at baka sayang lang ang ibabayad ko dun for the MEP lesson...

    Architectural Draftsperson (ANZSCO 312111)
    VISA 190
    March 2, 2015 - ACT State Sponsorship application submitted
    April 21, 2015 - CO assigned
    May 6, 2015 - CO asked for further employment research
    May 18, 2015 - State Sponsorship application approved
    May 24, 2015 - Lodged Visa 190 Application
    July 21, 2015 - CO contact
    July 28, 2015 - submitted all required documents
    September 18, 2015 - Visa Grant!!! :D

  • JayVilJayVil Sydney
    Posts: 15Member
    Joined: Apr 13, 2015
    @match_prop san ka kumuha ng training ? ako ongoing plng matatapos in 3 weeks time..
  • thegreatiam15thegreatiam15 Sydney
    Posts: 799Member
    Joined: Jan 07, 2014
    Hello mga sir... Nag take na din ako ng Revit class at halos patapos na.. Revit Architecture lang po ang covered ng lessons.. Question: mas ok ba kung mag-enrol na din ako for Revit MEP o kahit hind na? -- kasi baka hindi ko na din pala kailangan kasi Architecture naman talaga background ko at baka sayang lang ang ibabayad ko dun for the MEP lesson...
    Added bonus kung matututo ka pero kung job scope mo cover lang yung architectural then i dont see the point taking up the mep. Unless small residential projects nyo. Pero architect ka naman so small residential projects doesnt need complicated mechanical. Usually simpleng sanitary cold water sewage layout lang yan. Simpleng electrical layout done. Kaya mo na gawin yun by googling or youtube

    Cheers

    I haven't lost everything except my mind...

  • match_propmatch_prop Sydney
    Posts: 80Member
    Joined: Sep 19, 2013
    @JayVil hi... dito sa Abu Dhabi UAE...

    Architectural Draftsperson (ANZSCO 312111)
    VISA 190
    March 2, 2015 - ACT State Sponsorship application submitted
    April 21, 2015 - CO assigned
    May 6, 2015 - CO asked for further employment research
    May 18, 2015 - State Sponsorship application approved
    May 24, 2015 - Lodged Visa 190 Application
    July 21, 2015 - CO contact
    July 28, 2015 - submitted all required documents
    September 18, 2015 - Visa Grant!!! :D

  • match_propmatch_prop Sydney
    Posts: 80Member
    Joined: Sep 19, 2013
    edited October 2015
    @thegreatiam15.. sabagay, hindi ko naman sya maging scope kung para sa malaking projects na. kung sa simpleng residential projects lang ay baka mapasabak nga ng MEP. check ko youtube at baka madali lang naman. Thank you!.

    Architectural Draftsperson (ANZSCO 312111)
    VISA 190
    March 2, 2015 - ACT State Sponsorship application submitted
    April 21, 2015 - CO assigned
    May 6, 2015 - CO asked for further employment research
    May 18, 2015 - State Sponsorship application approved
    May 24, 2015 - Lodged Visa 190 Application
    July 21, 2015 - CO contact
    July 28, 2015 - submitted all required documents
    September 18, 2015 - Visa Grant!!! :D

  • JJ2AUJJ2AU Sydney
    Posts: 32Member
    Joined: Apr 19, 2015
    Hello po sa lahat..ask ko lang po..meron ba nag-ooffer ng NAVISWORKS software training sa Sydney? at okay rin po bang kumuha ng certification sa NAVISWORKS para mas lumaki ang chance na makahanap ng work sa Sydney? Thanks in advance....
Sign In or Register to comment.
LATEST 10 ACTIVE DISCUSSION THREAD
angel_iq4

Waiting for GRANTS

most recent by fmp_921

angel_iq4

SC189 FY 2024-2025

most recent by uoieaeam

angel_iq4

General Skilled Immigration Visa - Step By Step Process

most recent by whimpee

angel_iq4

Australian Computer Society Skills Application

most recent by mathilde9

angel_iq4

States Invitations and Nomination Matters for FY 2024-2025

most recent by casssie

angel_iq4

Medical

most recent by jar0

angel_iq4

Western Australia Immigration Matters FY 2024-2025

most recent by fmp_921

angel_iq4

AUSTRALIAN CITIZENSHIP TIMELINE

most recent by chewy

angel_iq4

VICTORIA STATES SPONSORSHIP 2024-2025

most recent by rainmaker

angel_iq4

Ph Vacation with One Month Visa Validity

most recent by Ozdrims

Welcome to Pinoy AU Community!

The longest running Pinoy-Australian Forum site in the history. We are connecting Pinoys "in" and "to" Australia since 2010! If you want to join in, click one of these buttons!

Sign In Register

Quick Links

Categories

Random Members
(55234)

atriedstonedianepumaaucedeinnoj5000rpmunanimous21gomez09bellecaye_18mtmayonlengsalviJojoDUX1682martinnguyenraredusk001SnowniffUnidox201102xparbatsnowtearsfridy78jefft
Browse Members

Members Online (5) + Guest (97)

MidnightPanda12onieandresnaksuyaaaCantThinkAnyUserNameasfal0th

Top Posters
This Month

Top Active Contributors
Latest

Top Posters
All Time

Pinoy in Australia Information Forum