Electrical Engineers Thread

ed_lupeet

@engrllagas transmisson, distribution pati energy market mga inaplayan ko. pagdating ko na lang sa oz mag apply sa odd jobs at magpa refer sa mga kilala.

jmayanmaven

I'm not sure if I am in the right section in the forum, sorry. I just want to ask if pwede po makahingi ng CDR sample for electrical engineer for reference lang. Thank you in advance.

[email protected]

Electrical_Engr_CDR

kamusta po mga ka- EE. hows job hunting dun sa mga bagong dating or parating pa lang. from offshore ako apply pero olats pa rin.

wannabecathy

Hi, my hubby is the main applicant and he is an Electrical Engineer, can you ahare po sample CDR for reference? [email protected] email nya

ed_lupeet

@Electrical_Engr_CDR kakadating pa lang namen sa oz at mag start na ko mag apply ulet. sana swertehen

Electrical_Engr_CDR

@ed_lupeet good luck sa atin sa july pa ako mag move. kaka entry ko lang last week dito na uli pinas

alod

hello po. tanong ko lang po sana if mayroon po dito na licensed ECE pero Electrical Engineer yung pina assess sa EA. Hindi po ba magkakaproblema pag ganito ginawa?
Licensed ECE po kasi ako pero Electrical Design Engineer yung trabaho ko. Bale nagdedesign po ng control systems para sa factory automation. Tsaka isa pa po, tungkol sa PRC certificate, pwede po ba yung score sheet ng Licensure exam or PRC ID na expired yung iupload? Na misplace po kasi yung certificate ko sa pinas, tapos dito po ako sa SG. Salamat po sa magrereply.

Electrical_Engr_CDR

@alod palagay ko subukan mo lang sasabihin naman nila sayo yung assessment mo.
Kung may problema naman palagay kaya solusyonan yan.

Pwede mo try ipakita ang score sheet pero if hindi sila satisfied doon obligado ka talaga mag provide ng PRC id or cert.

advice ko para maka cgurado kumuha ka na lang prc id. check mo rin kung may IECEP sa singapore baka pwede ka dun apply para di ka umuwi ng pinas. o kaya Leave mo na lang tatlong araw ok na yun makakakuha ka na sa prc.

se29m

@Electrical_Engr_CDR hindi ako nagbigay ng prc report or license kasi di ako pumasa hehehe.. Pero positive assessment naman sakin..

Electrical_Engr_CDR

@se29m wow, isa ka sa mga maswerte kung ganun. Nakalagay kasi sa EA Booklet na mag provide proof of registration. anyway sa kaso mo no choice ka talaga.

Well if kaya naman ibigay bakit hindi. if later on hiningi problema din at ma dedelay lang ang application ni @alod.

alod

@Electrical_Engr_CDR salamat sa reply bro.
Problema kasi sa renewal nang mga ECE is kailangan mgpa renew muna sa IECEP.
Tapos tong IECEP, may points system, parang yung tinatawag na CPD. Kailangn umattend ng mga seminars. Eh dito ako SG so wala ako nun. Meron ako PRC ID pero expire nung 2013 pa. 2010 ko huling na renew yun tapos 2011 dito nako sa SG. So parang gawin ko nalang is attach yung score sheet tska yung expired na PRC ID. maiintindihan nmn cguro nung EA na hindi na narenew kasi di nmn din kailangn dito sa SG yung license.

iammaxwell1989

I provided EA a scanned copy of my expired PRC license, and PRC exam results. I didn't have any issues.

ed_lupeet

sa mga may work na as electrician or any trades pahinge naman kopya ng cv nyo.

MumVeng

For Engineers in NSW, just sharing a very helpful and reliable site. Hope this helps..kudos!

http://iworkfor.nsw.gov.au/jobs/all-keywords/all-agencies/all-organisations--entities/engineering-jobs/all-locations/all-worktypes?jobcategoryid=10345&page=1

junarsan

kumusta mga kapwa ko EE. just arrived in Perth on July 4 under subclass 189. its good na may ganitong forum para sa mga tulad natin na nagbabalak magsimula sa aussie. galing ako sa Singapore at nandun pa din ang family ko and hopefully before the end of the year makatagpo ng starting point dito sa OZ. Senior Field Service Engineer ang huli kong trabaho sa SG specialised in Oil and Gas Drillingcontrol systems.
nakita ko sa mga ads ang mga ibat ibang license na hinahanap nila kaya medyo confuse ako. kailangan ba nating kumuha ng mga course na ito to be qualified to work here.puede naman daw mabawasan ang duration ng course kung may RPL.
anyway, balak kong mag stay for one month dito sa Perth dahil dito nga naka base ang oil and gas and heavy industries. floating status ako and willing to work in any states.

any advise mga kabaro?

Megger

@MumVeng , nasa OZ ka na ba? Saang state? Kumusta namn job market dyan, lalo sa mga manufacturing plant maintenance and services, like Equipment and Automation? TIA. God bless..

MumVeng

Megger said:

@MumVeng , nasa OZ ka na ba? Saang state? Kumusta namn job market dyan, lalo sa mga manufacturing plant maintenance and services, like Equipment and Automation? TIA. God bless..

@Megger kakauwi ko lang sa Pinas last month. Sa NSW kami pero while I was there I wasnt really looking for a job so I really cannot answer your question regarding manufacturing, maintenance and services. As I've seen, dami road works dun sa ngayon and rennovation and construction sa Sydney Trains. May kapit-bahay kami na sa Sydney Trains nagwowork, ok talaga ang salary!

Electrical_Engr_CDR

share ko lang Australian standards

http://r.b5z.net/i/u/10115377/f/Australian Standards/AS_NZSv3000-2007_incl_amdt_1.pdf

http://r.b5z.net/i/u/10115377/f/Australian Standards/AS_NZS_3008.1.2-2010_Electrical_installations_-_Selection_of_cables_-_Cables_for_alternating_voltages_up_to_a.pdf

https://law.resource.org/pub/nz/ibr/as-nzs.3012.2010.pdf

MumVeng

@Megger Kakauwi ko pa lang po dito sa Pinas last month. Ngayon ko pa lang po tinitignan ang Work Visas kasi po dapat partner visa ang aapplyan namin kaso po ang mahal at ang tagal. Sa NSW po kami sa sydney, Mahirap maghanap ng work kahit po anong field. We have a neighbor working as an engineer for Sydney Trains and he said that most of the times it's the connection that gets you the job. It's very competitive environment for engineers. As for him he needed extra masters and other studies to "go up the ladder". Pero laki po ng sweldo once nakakuha ka na ng engineering job. Sorry po hindi ko yata nasagot yung tanong nyo, hehe. Goodluck na lang po sa job hunting.

MumVeng

@Megger Kakauwi ko pa lang po dito sa Pinas last month. Ngayon ko pa lang po tinitignan ang Work Visas kasi po dapat partner visa ang aapplyan namin kaso po ang mahal at ang tagal. Sa NSW po kami sa sydney, Mahirap maghanap ng work kahit po anong field. We have a neighbor working as an engineer for Sydney Trains and he said that most of the times it's the connection that gets you the job. It's very competitive environment for engineers. As for him he needed extra masters and other studies to "go up the ladder". Pero laki po ng sweldo once nakakuha ka na ng engineering job. Sorry po hindi ko yata nasagot yung tanong nyo, hehe. Goodluck na lang po sa job hunting.

Shaysheng

@Futures hi.. Pwede po ba ako maka hingi ng sample CDR, EE here eperience building services. 4 years.

Electrical_Engr_CDR

@Shaysheng send mo sakin email mo.

Shaysheng

@Electrical_Engr_CDR ito po email add ko
[email protected]
thanks madami...

Shaysheng

:-h

Electrical_Engr_CDR

@Shaysheng email sent

Megger

Ano ba mga licenses na kailangan para maka work as electrical practitioner sa NSW, or Oz in general? Thanks.

Shaysheng

@Electrical_Engr_CDR L thanks much sir! confirmed received it. God Bless!

Electrical_Engr_CDR

@Megger kung Engineer, estimator or drafting jobs di kailangan ng license. pero electrician kailangan ng license. kailangan mo rin mag apprentice muna 3yrs ata if im not mistaken as a requirement for electrician license. depende rin sa state kung ano ano mga requirements.

Electrical_Engr_CDR

@Shaysheng your welcome. advise ko lang go for prof engineer.

Megger

@Electrical_Engr_CDR , thanks sa reply Bro. Were you able to land a job as electrical Engr, or electrical related? Saang state po kayo? God bless po sa inyo dyan...