Ad space available
reach us at [email protected].
Major update has been completed. Please help to report any abnormality that you are facing (in case there is any) to [email protected] . Thank you for your continued support guys!

Industrial Engineers/Mechanical Engineers/ Production or Plant Engineers Thread (ANZSCO 233513)

1434445464749»

Comments

  • jakibantilesjakibantiles Sydney
    Posts: 315Member
    Joined: Jan 14, 2019

    Hello po. Makakapag apply pa po ba tayong mga ME ng state sponsorship pag offshore at walang at least 1yr experience sa kahit AU? Parang halos lahat ng state may additional requirements at di magqqualify for 491/190. Any thoughts po?

    ANZSCO 233512 | Mechanical Engineer | Age: 30, Education: 15, Work Experience: 10, PTE: 20, Spouse: 10, CCL: 5 | State Nom: 5 (NSW)

    Lodged Visa 482 | 17 Mar 2020 | Granted 24 Sep 2020 while Offshore
    Travel Exemption | DOA: 08 Oct 2020 | Approved: 12 Oct 2020

    Lodged EOI: Visa 190/95pts NSW
    DOE: 23 Dec 2020
    Pre-Invite: 10 June 2021
    ITA: 18 June 2021
    Visa Lodge: 05 Aug 2021
    Medical: 31 Jan 2022
    Visa Grant: 20 Apr 2022

  • jun_als89jun_als89 Posts: 2Member
    Joined: Sep 09, 2020

    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

  • anna_manna_m Quezon City
    Posts: 52Member
    Joined: Mar 14, 2014

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi I am not familiar with your case but you may want to check the latest guidelines released by Engineer Australia they might have guidance on your case. Or FAQs page. Better to get info directly from them. You might want to check other threads regarding skills assessment na similar ng case mo.

  • toyotafxtoyotafx Posts: 88Member
    Joined: Sep 25, 2020

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    anna_m

    133512 offshore | 190 - 80 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 10 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | 491 - 100 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5/15 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512
    03.11.21 - ROI submitted to SA. 491 @ 100 pts for 233513
    25.11.21 - ITA SA ROI. submitted application
    26.11.21 - SA ROI approved. EOI ITA issued
    24.12.21 - lodged 491 invite for SA. waiting for character reference from SG. health exam notice issued by immi.
    15.01.22 - uploaded SG character reference, updated medical
    08.02.22 - received 190 NSW invite for 133512
    18.02.22 - lodged 190 invite for NSW.
    10.05.22 - granted 190 NSW. no CO contact.

  • GrifterGrifter Posts: 458Member
    Joined: Oct 19, 2016
    @jun_als89 hello. Gamitin nyo po kung saan mas match/ mas matagal yung experience nyo as per anzsco. Kung san kayo makakakuha ng higher points.

    I had an officemate po, EE graduate pero nagpa assess as IE kase mas IE related ang work nya, nakalusot naman po sa EA. That was 2018.

    All the best!
  • jax2016jax2016 Posts: 2Member
    Joined: Sep 23, 2020

    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

  • anna_manna_m Quezon City
    Posts: 52Member
    Joined: Mar 14, 2014

    @jax2016 said:
    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

    Congrats for having decided to migrate to Australia. First off, please check with Engineers Australia website for their latest guidelines. Baka kasi may mga nag-iba na. For starters, alam ko po kelangan nyo proof of full-time paid employment. Pa check n lng po ano po specific n kelangan. Most people po ata ay pay slip or ITR prinoprovide. Good luck din po.

  • jax2016jax2016 Posts: 2Member
    Joined: Sep 23, 2020

    @anna_m said:

    @jax2016 said:
    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

    Congrats for having decided to migrate to Australia. First off, please check with Engineers Australia website for their latest guidelines. Baka kasi may mga nag-iba na. For starters, alam ko po kelangan nyo proof of full-time paid employment. Pa check n lng po ano po specific n kelangan. Most people po ata ay pay slip or ITR prinoprovide. Good luck din po.

    Salaman Ms. Anna..
    Any with sample CDR for Oil and Gas na experience for Mechanical Engineer.?
    [email protected]
    Thanks in Advance

  • ericson29ericson29 Posts: 11Member
    Joined: Jul 28, 2020

    Hi po tatanong ko long po graduate po kasi ako ng EE and etong last job ko of 5 years is as a production engineer though yung product is pang electrical san po kaya sya pasok. Di naman po ako kasama sa nagdedesign nagsusupervise po ako ng assembly tsaka wiring ng mga switchgears. Salamat po sa sasgot

  • toyotafxtoyotafx Posts: 88Member
    Joined: Sep 25, 2020

    @toyotafx said:

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    Hi @jun_als89. Just got my assessment from EA, came out positive and they recognized all of my relevant employment which is what I was hoping for. Here's a brief personal background and what I did.

    • Manufacturing Engineering and Management qualification
    • Employment for the past X years primarily in supply chain across several companies
    • I submitted my CDR which was aligned to industrial engineering (mali pala nabanggit ko sa taas), but was assessed as a production engineer
    • I got notified to submit additional documents from my first employment but was not able to provide specifically what they asked for. I opted to submit all of the documents that I have of my first employment, regardless if it wasn't in the list of qualified documents by EA.
    • Got a positive assessment as a Production Engineer, not Industrial Engineer, even if my background was in Supply Chain. I can only attribute this to how I drafted my CDR.

    Overall, based from my experience, EA assesses your qualifications based on:
    1. Quality of your CDR - make sure you don't copy or use someone else's CDR. there are a lot of materials on the internet to help you guide with your CE creation
    2. Your qualifications - it should be at the very least, aligned with your target qualification, if in case your CDR does not cut it
    3. CPD - i didn't put a lot of info, only a handful of seminars i've attended
    4. documents - luckily, i was studious enough to keep all of my 2316s and I just downloaded my SSS contribution and employment background in the portal. COEs are easy enough to get, as still maintain contact with my past employers.

    I hope this helps!

    xiaoxue

    133512 offshore | 190 - 80 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 10 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | 491 - 100 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5/15 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512
    03.11.21 - ROI submitted to SA. 491 @ 100 pts for 233513
    25.11.21 - ITA SA ROI. submitted application
    26.11.21 - SA ROI approved. EOI ITA issued
    24.12.21 - lodged 491 invite for SA. waiting for character reference from SG. health exam notice issued by immi.
    15.01.22 - uploaded SG character reference, updated medical
    08.02.22 - received 190 NSW invite for 133512
    18.02.22 - lodged 190 invite for NSW.
    10.05.22 - granted 190 NSW. no CO contact.

  • renzkimwellrenzkimwell Posts: 8Member
    Joined: Apr 06, 2021

    @toyotafx said:

    @toyotafx said:

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    Hi @jun_als89. Just got my assessment from EA, came out positive and they recognized all of my relevant employment which is what I was hoping for. Here's a brief personal background and what I did.

    • Manufacturing Engineering and Management qualification
    • Employment for the past X years primarily in supply chain across several companies
    • I submitted my CDR which was aligned to industrial engineering (mali pala nabanggit ko sa taas), but was assessed as a production engineer
    • I got notified to submit additional documents from my first employment but was not able to provide specifically what they asked for. I opted to submit all of the documents that I have of my first employment, regardless if it wasn't in the list of qualified documents by EA.
    • Got a positive assessment as a Production Engineer, not Industrial Engineer, even if my background was in Supply Chain. I can only attribute this to how I drafted my CDR.

    Overall, based from my experience, EA assesses your qualifications based on:
    1. Quality of your CDR - make sure you don't copy or use someone else's CDR. there are a lot of materials on the internet to help you guide with your CE creation
    2. Your qualifications - it should be at the very least, aligned with your target qualification, if in case your CDR does not cut it
    3. CPD - i didn't put a lot of info, only a handful of seminars i've attended
    4. documents - luckily, i was studious enough to keep all of my 2316s and I just downloaded my SSS contribution and employment background in the portal. COEs are easy enough to get, as still maintain contact with my past employers.

    I hope this helps!

    Hello Sir boss, may tanong lang po ako. How long bago mag feedback senyo si EA? And how long po bago ikaw maregister positively by EA? Also, ano po yung CCL? And pano po kumuha ng exam na yun? Thank you po Sir sa Pagsagot :smile:

  • AprilMay21AprilMay21 Posts: 5Member
    Joined: Nov 05, 2021

    Hi, Industrial Engineer here. Anyone na under ICT Business Analyst - ANZSCO 261111?

  • silverbulletsilverbullet Posts: 280Member
    Joined: Jan 24, 2020

    Hello, meron bang na invite sa inyo? Under SC 189 lowest 90 points nitong last invitation rounds? Hehe.

    233512 - Mechanical Engineer ( Age: 33 - 25 points | Education: Adamson University - 15points | Work Experience 8 years - 15points | English - 20points | Partner English - 5 | CCL - 0) Total: 80 points

    19/01/2020 - Interest in Australia Stuff
    24/01/2020 - Start gathering of information
    30/01/2020 - Start reviewing PTE Academic and booked exam on March 30, 2020
    29/02/2020 - PTE MOCK TEST A ( L:64 | R: 53 | S: 59| W: 68 ) sad!
    14/03/2020 - PTE MOCK TEST B ( L: 71| R: 60 | S: 75| W: 74) a little bit happy but I am aiming for superior.
    30/03/2020 - PTE EXAM (L: 71 | R: 86 | S: 85 | W: 74 ) SAD! ALMOST THERE! Going for superior! 18 April
    18/04/2020 - PTE EXAM (L:73 | R: 76 | S: 90 i W: 77 ) SAD! ALMOST THERE! EXAM REFUNDED, GOT ISSUE WITH INVIGILATOR.
    09/06/2020 - EA SKILL ASSESSMENT LODGE FOR 233512 MECHANICAL ENGINEER
    03/07/2020- EA request additional requirements and asked to rewrite the 3 episodes and SS
    22/07/2020- Submitted the rewritten 3 episodes, SS, and other requirements. 3episodes and SS coached by @MumVeng
    23/07/2020- EA asked additional requirements again, latest payslip.
    24/07/2020 - Submitted the latest payslips and received POSITIVE OUTCOME after an hour.
    12/08/2020 - PTE PARTNER - PASS!
    14/09/2020 - PTE EXAM - (L: 81 | R: 86 | S: 88 | W: 90) SUPERIOR !! SO HAPPY! THANK GOD!!
    06/10/2022- 189 ITA
    20/10/2022- Visa 189 Lodged
    09/02/2023 - VISA GRANT - Direct grant!!! THANK YOU LORD !!!!!

    Lord whispered "My precious child, I love you and will never leave you
    Never, ever, during your trials and testings.
    When you saw only one set of footprints,
    It was then that I carried you."

  • AprilMay21AprilMay21 Posts: 5Member
    Joined: Nov 05, 2021

    Hello @toyotafx , pwede pashare ng cdr mo?

  • toyotafxtoyotafx Posts: 88Member
    Joined: Sep 25, 2020

    Any update on this thread? Dami lumalabas na 233513 invites for SA on 491

    133512 offshore | 190 - 80 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 10 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | 491 - 100 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5/15 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512
    03.11.21 - ROI submitted to SA. 491 @ 100 pts for 233513
    25.11.21 - ITA SA ROI. submitted application
    26.11.21 - SA ROI approved. EOI ITA issued
    24.12.21 - lodged 491 invite for SA. waiting for character reference from SG. health exam notice issued by immi.
    15.01.22 - uploaded SG character reference, updated medical
    08.02.22 - received 190 NSW invite for 133512
    18.02.22 - lodged 190 invite for NSW.
    10.05.22 - granted 190 NSW. no CO contact.

  • toyotafxtoyotafx Posts: 88Member
    Joined: Sep 25, 2020

    @AprilMay21 said:
    Hello @toyotafx , pwede pashare ng cdr mo?

    Pm mo na lang ako i can help you give pointers how to make a CDR

    133512 offshore | 190 - 80 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 10 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | 491 - 100 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5/15 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512
    03.11.21 - ROI submitted to SA. 491 @ 100 pts for 233513
    25.11.21 - ITA SA ROI. submitted application
    26.11.21 - SA ROI approved. EOI ITA issued
    24.12.21 - lodged 491 invite for SA. waiting for character reference from SG. health exam notice issued by immi.
    15.01.22 - uploaded SG character reference, updated medical
    08.02.22 - received 190 NSW invite for 133512
    18.02.22 - lodged 190 invite for NSW.
    10.05.22 - granted 190 NSW. no CO contact.

  • datadashdatadash OFFSHORE (DIY)
    Posts: 28Member
    Joined: Jul 06, 2022

    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

    ME (233512) | SC189 | 2023

  • Edwardsq11516Edwardsq11516 Posts: 19Member
    Joined: Jul 30, 2020

    Hi anyone here na Instrumentation and Control Engineer ang natapos or may kakilala at nag pa assess
    as ANZSCO 233513?

  • datadashdatadash OFFSHORE (DIY)
    Posts: 28Member
    Joined: Jul 06, 2022

    Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

    04-AUG: Submitted my MSA CDR application (fast track)
    23-AUG: Received a positive outcome letter

    No contact with assessor. Your mileage may vary hehe.
    I did not expect my application will be this fast.

    My occupation and work details are quoted below.

    @datadash said:
    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

    ME (233512) | SC189 | 2023

  • lorenzmamangonlorenzmamangon Muntinlupa City
    Posts: 79Member
    Joined: May 22, 2022

    Bumping this thread up ulit para sa mga IE natin na ongoing sa VISA processing :) musta po status nyo?

    Industrial Engineer - ANZSCO 233511
    _______________________________________________________________
    POINTS BREAKDOWN
    Age-30; Civil Status-10; Education-15; Work Experience-5; English Level-10
    491 = 85 pts | 190 = 75 pts |189 = 70 pts
    _______________________________________________________________
    English Proficiency Exam = Pearson
    Skills Assessment Authority = Engineers Australia
    _______________________________________________________________
    TIMELINE
    May 2022 - Review for PTE
    Jun 2022 - Actual PTE Exam; Score = L(73); R(76); S(89); W(74); O(76)
    Aug 2022 - Signed for EA (Starts reading about CDR/CDR RSEA/& FASTRACK)
    Oct 2022 - Draft CEs for EA
    Dec 2022 - Submitted EA application (w/ Fast Track)
    Jan 2023 - Received “AWARDED” Assessment from EA | Work experience credited
    Jan 2023 - Lodged EOI for VISA 189/ 190 (SA, NSW, VIC)

    _______________________________________________________________
    CURRENT STATUS
    Waiting for INVITE

  • angelouangelou Posts: 4Member
    Joined: Dec 15, 2022

    Hello po, ask ko lang sino may experience paanu mag paassist sa EA while inside australia graduate po ako ME sa pinas. Currently working po ako 400 visa plan ko sana mag apply ng 189 visa.

  • anna_manna_m Quezon City
    Posts: 52Member
    Joined: Mar 14, 2014

    @toyotafx said:

    @toyotafx said:

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    Hi @jun_als89. Just got my assessment from EA, came out positive and they recognized all of my relevant employment which is what I was hoping for. Here's a brief personal background and what I did.

    • Manufacturing Engineering and Management qualification
    • Employment for the past X years primarily in supply chain across several companies
    • I submitted my CDR which was aligned to industrial engineering (mali pala nabanggit ko sa taas), but was assessed as a production engineer
    • I got notified to submit additional documents from my first employment but was not able to provide specifically what they asked for. I opted to submit all of the documents that I have of my first employment, regardless if it wasn't in the list of qualified documents by EA.
    • Got a positive assessment as a Production Engineer, not Industrial Engineer, even if my background was in Supply Chain. I can only attribute this to how I drafted my CDR.

    Overall, based from my experience, EA assesses your qualifications based on:
    1. Quality of your CDR - make sure you don't copy or use someone else's CDR. there are a lot of materials on the internet to help you guide with your CE creation
    2. Your qualifications - it should be at the very least, aligned with your target qualification, if in case your CDR does not cut it
    3. CPD - i didn't put a lot of info, only a handful of seminars i've attended
    4. documents - luckily, i was studious enough to keep all of my 2316s and I just downloaded my SSS contribution and employment background in the portal. COEs are easy enough to get, as still maintain contact with my past employers.

    I hope this helps!

    @toyotafx said:

    @toyotafx said:

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    Hi @jun_als89. Just got my assessment from EA, came out positive and they recognized all of my relevant employment which is what I was hoping for. Here's a brief personal background and what I did.

    • Manufacturing Engineering and Management qualification
    • Employment for the past X years primarily in supply chain across several companies
    • I submitted my CDR which was aligned to industrial engineering (mali pala nabanggit ko sa taas), but was assessed as a production engineer
    • I got notified to submit additional documents from my first employment but was not able to provide specifically what they asked for. I opted to submit all of the documents that I have of my first employment, regardless if it wasn't in the list of qualified documents by EA.
    • Got a positive assessment as a Production Engineer, not Industrial Engineer, even if my background was in Supply Chain. I can only attribute this to how I drafted my CDR.

    Overall, based from my experience, EA assesses your qualifications based on:
    1. Quality of your CDR - make sure you don't copy or use someone else's CDR. there are a lot of materials on the internet to help you guide with your CE creation
    2. Your qualifications - it should be at the very least, aligned with your target qualification, if in case your CDR does not cut it
    3. CPD - i didn't put a lot of info, only a handful of seminars i've attended
    4. documents - luckily, i was studious enough to keep all of my 2316s and I just downloaded my SSS contribution and employment background in the portal. COEs are easy enough to get, as still maintain contact with my past employers.

    I hope this helps!

    Question po... Regarding CDR + RSEA, ano pong outcome yung ibibigay sa inyo... Medyo nalilito po ako dun sa relevant skilled employment assessment nila. Bale may CDR na po ako dati pa kaso for counting of overseas skilled employment ---> would CV be enough? Or need pa ba ng accompanying relevant skilled employment assessment nila? For the past EOI's, I only used CDR lang po and then for work experience, I attach lang palagi CV.

  • anna_manna_m Quezon City
    Posts: 52Member
    Joined: Mar 14, 2014

    @datadash said:
    Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

    04-AUG: Submitted my MSA CDR application (fast track)
    23-AUG: Received a positive outcome letter

    No contact with assessor. Your mileage may vary hehe.
    I did not expect my application will be this fast.

    My occupation and work details are quoted below.

    @datadash said:
    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

    Question po regarding your outcome letter ano pong naka-indicate? Same letter then will qualify both as points for australian education and at the same time for counting of employment?

  • datadashdatadash OFFSHORE (DIY)
    Posts: 28Member
    Joined: Jul 06, 2022

    Degree qualification lang, hindi kasali yung assessment sa years of employment since CDR lang yung application ko. But you can add it (RSEA) to your application kung gusto mo na assessed din yung years of employment. It comes with additional fee.

    @anna_m said:

    @datadash said:
    Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

    04-AUG: Submitted my MSA CDR application (fast track)
    23-AUG: Received a positive outcome letter

    No contact with assessor. Your mileage may vary hehe.
    I did not expect my application will be this fast.

    My occupation and work details are quoted below.

    @datadash said:
    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

    Question po regarding your outcome letter ano pong naka-indicate? Same letter then will qualify both as points for australian education and at the same time for counting of employment?

    ME (233512) | SC189 | 2023

  • jmaaagjmaaag Posts: 3Member
    Joined: Jan 16, 2024

    @datadash said:
    Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

    04-AUG: Submitted my MSA CDR application (fast track)
    23-AUG: Received a positive outcome letter

    No contact with assessor. Your mileage may vary hehe.
    I did not expect my application will be this fast.

    My occupation and work details are quoted below.

    @datadash said:
    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

    Sir pwede makahingi nang CDR for reference? Piping Design Engr. din ako with 9 years experience. Maraming salamat.

  • jmaaagjmaaag Posts: 3Member
    Joined: Jan 16, 2024

    @datadash

    Sir pwede makahingi nang CDR for reference? Piping Design Engr. din ako with 9 years experience. Maraming salamat.

    @datadash said:
    Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

    04-AUG: Submitted my MSA CDR application (fast track)
    23-AUG: Received a positive outcome letter

    No contact with assessor. Your mileage may vary hehe.
    I did not expect my application will be this fast.

    My occupation and work details are quoted below.

    @datadash said:
    Hello :)
    Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

    Did you submit CDR only, or CDR+RSEA?

    (I am a piping design engr with 8+ yrs of EPC experience in one company)

Sign In or Register to comment.
LATEST 10 ACTIVE DISCUSSION THREAD

Welcome to Pinoy AU Community!

The longest running Pinoy-Australian Forum site in the history. We are connecting Pinoys "in" and "to" Australia since 2010! If you want to join in, click one of these buttons!

Categories

Random Members
(55155)

kathyalvarez27pinoyaukathyalvarezHiltonSasajaaybuenasieistzenneil27notmhelhannahmy2secretidentity290Aizeinfinitybestieerizavillamor016Hachiko20hlucobWecostarkiskingpp12345choops89WayneNobfendiA
Browse Members

Members Online (0) + Guest (124)

Top Active Contributors

Top Posters