Engineers Australia Skills Assessment

ms_ane · August 2019

Hi everyone. Nais ko po sanang basahin lahat ng comments dito Pero naguguluhan pa ako sa ibang terms, pero anyway, may tanong po ako. EE po ako and ung bf ko po is Safety Officer, saang category po kaya siya if ever he needs to be assessed? And what do you mean po pag PARTNER POINTS?
At ikakasal na din kami this November, kaya baka next year sisimulan n namin ung sa ielts and lahat ng requirements. Sa ngayon, I’m really struggling to learn ung process po ng application for Australia. Malaki tulong po tong blog.
Thank you!

hello start ka dun sa thread ng May 2019 Visa 189/190/489 thread, may step by step guide doon na very useful sa mga nagsisimula pa lang. Totoong overwhelming kaya take 1 info at a time, otherwise malilito kang tunay.

ms_ane · August 2019

@alegnallanes said:
Hi good afternoon. Can someone help me po sa CDR? Hirap na hirap talaga ako gumawa, haist. 😢 Electrical Engineer here, 5years experience in HV Design Substation Projects. Salamat

hello kapatid. kaya mo yan! we've all been there at tunay na mahirap nga sya pero kaya naman
Start from identifying at least 4 projects where ikaw ang project lead then pagpilian mo anong project and best na makakapag demonstrate ng iyong engineering skills na nai apply mo during your work, then pili ka ng tatlo then start ka sa pinaka luma all the way sa pinaka bago.

Enhinyero19 · August 2019

@donyx Hello sir pwede ren po ba pasend saken yung CDR and CPD format. Thanks

johnpauldelacruz · September 2019

Sir @donyx pwede po pa-send din ng CDR and CPD format.

@all
IE po yung graduate ko with a total of 9 years of experience.
5 years in Logistics and 4 years in Production Planning.
Question: in skill assessment dapat ba ilagay ko na 9 years under IE or 4 years under Production engineer?

Thank you in advance!

core17 · September 2019

Hi po! Pwede po makahingi ng sample CDR at CPD?Kakatapos ko lang po magtake ng PTE-A and planning to start my EA lodgement. I'm currently working in a telecom company here in the Philippines as a Telecommunication Engineer with more than 3 years working experience.Thank you for kind consideration. You're help is greatly appreciated.

Email: [email protected]

johnpauldelacruz · September 2019

@johnpauldelacruz said:

Sir @donyx pwede po pa-send din ng CDR and CPD format.

@all
IE po yung graduate ko with a total of 9 years of experience.
5 years in Logistics and 4 years in Production Planning.
Question: in skill assessment dapat ba ilagay ko na 9 years under IE or 4 years under Production engineer?

Thank you in advance!

Eto po pala email ko: [email protected]

anica · September 2019

Guys, pahelp po decide kung ano po ang tamang ANZSCO nominated occupation ang dapat sa akin para sa Engineer na nag wowork sa telecom industry specifically na assign po ako sa Field in the Oparations and Maintenance Department. Most of the time po naka field po ako handling outdoor works doing site repairs and maintenance.

263311 Telecommunication Engineer OR
313212 Telecommunication Field Engineer

Salamat po sa sasagot.

bpgamerslobby · September 2019

Hello po,

Im an Electrical Engineer po, nag work po as field engineer for a construction company and now as quantity surveyor po for an electrical company, ask ko lang sana sa pag papassess sa Engineers Australia, alin po yung fit saken sa 3?

Professional Engineer
Engineering Technologist
Engineering Associate

Thank you po sa advise.

Enhinyero19 · September 2019

May nakapag try na po ba bumili ng cdr online?

rvonline · September 2019

Goodluck sa lahat ng Engineers especially un mga Civil, Electrical at Mechanical. Hopefully you get a job in NSW, VIC or QLD where big projects are currently constructed and more big projects to follow.

BMamba24 · September 2019

Hello po sa lahat. baka po mayroon kayo na sample ng CDR for Production or Plant Engineer. Work experience po is instrumentation engineering sa EPC companies like JGC, fluor, chiyoda, jabobs etc. Ang hirap po kasi mag compose sobra huhu

ok lang po pasend sa icdattcwsme.gmail.com

salamat po

jobet2000 · September 2019

@australiandreams said:

> @donyx said:
> Type your comment> @australiandreams said:
>
> Question po ulit: Since 1 page lang dapat ang CPD, ilang seminars/activities ang nailagay niyo dun? Paano po ang ginawa niyong format (headings, font size, etc.)? Thank you!! 😊
>
>
>
>
>
> Calibri size 12, bold sa title, single space, followed by a short 2 liner statement/introduction. Sa ilalim nun yung list/table na naka-image format para mare-size ko ng madali. Nagkasya yung 49 sa akin. Ginawa ko muna sa Excel yung list tapos pasted as image sa Word then save as pdf.

Thank you po! May kasamang description/details po ba yung mga seminars/activities sa table niyo? Portrait po ba or pwedeng i-landscape? Hehe. 😅

Hi ask ko lang kung 1 page ang CPD? hindi ba nakalagay sa guide na pag hindi kasya 1 page wag pilitin?

anastasia.salvador · September 2019

As per MSA booklet "Your CPD listing must not be more than one A4 page." @jobet2000

ms_ane · September 2019

> @anastasia.salvador said:
> As per MSA booklet "Your CPD listing must not be more than one A4 page." @jobet2000

- @jobet2000 Tama 1 page lang ang CPD so if you will, piliin maigi ang relevance ng mga seminars, trainings na isasama sa CPD kesa ang maiwan pa at di magkasya e yung mga importante

donyx · September 2019

@ms_ane said:

> @anastasia.salvador said:
> As per MSA booklet "Your CPD listing must not be more than one A4 page." @jobet2000

- @jobet2000 Tama 1 page lang ang CPD so if you will, piliin maigi ang relevance ng mga seminars, trainings na isasama sa CPD kesa ang maiwan pa at di magkasya e yung mga importante

Basta ang sinabi not more than one A4 page. Nasayo na kung ilan ang ilalagay mo at paano mo pagkakasyahin.

aGenG_2012 · September 2019

Hi sir/madam! May Agricultural Engineer kaya dito na ang nominated occupation ay Production Engineer? Kaka-receive ko lang ng PTE score ko this week then naging lurker ako dito sa forum at medyo naooverwhelm ako sa dapat gawin. Napansin ko din na may nagseshare ng CDR samples.

Kung meron pong makakapag-share dyan ng CDR sample ng Production Engineer, pakisend naman po. Thanks!

Email: [email protected]

aGenG_2012 · September 2019

Di ko maedit yung comment ko. If may CDR sample din po kayo na pang-Agricultural Engineer, makikisuyo na rin po na i-share ninyo sa akin. Salamat po ng marami! Good luck sa 'tin!

Francisco0789 · September 2019

Hi any Mechanical/Electrical Engineers here na positive ang outcome sa EA with facilities management experience? Yung experience ko kasi is

1+ year high rise construction
1+ year facilities management (mall)
1+ year facilities/maintenance ng trucks/heavy equipment

Also, CoE with SSS, ITR and Philhealth contributions pwede na ba na supporting documents?

Thank you!

Buncs · September 2019

Hello po!
Ask ko rin po kung pwedeng mag request ng CDR format for Production or Plant Engineer.
Salamat po ng marami.
email: [email protected]

JerichoSantos · September 2019

Pano po kaya kung operational ung work ko po at hindi project based? Pano ko po iprepresent sa cdr po un?

engrjaojao94 · October 2019

Hello, mga kabayan!

Hingi sana po ako ng reference ng CDR for Civil Engineers, especially yung nasa construction. Maraming salamat!
Email: [email protected]

jedd_allen · October 2019

Good evening everyone! Hingi po sana ako sample format ng CPD. Will be submitting my documents for assessment this week. Thank you po.

[email protected]

Erwann05 · October 2019

G'day! Pahingi din po ako ng CPD and CDR samples if you have.

[email protected]

Thanks, Erwann05

Jayemar24 · October 2019

Pde dn po pasend ng cdr copies nyo sir @markusandlucas, @IslanderndCity, @Captain_A, @mugsy27 sa email ko po dito sa: [email protected]
Saka [email protected].
Thank you sir. Ask q lng po if iadd lng s main applicant ung skill assessment ng asawa accept Kaya nla kng ung partner is 45 yrs old na? Ung main applicant nmn po is 34 lang. God bless

RobertLawrence · October 2019

Hi po sa lahat,
Magtatanong lang po sana ako, if ipapa-assess ko po ba is as Electronics Engineer, nasa MSA booklet kasi na " Registration certificate under the relevant licensing authority where applicable (e.g. Philippine Regulations Commission) " .
Ang tanong ko po, paano pag expired na yung license ko? D na kac needed dito sa Singapore ang license kaya d ko ka narenew matagal na. Hihingin ba nila yun to process the assessment?

ms_ane · October 2019

@RobertLawrence kapatid if meron ka naman na, iparenew mo nalang para mas sure ka na you’re following the required supporting docs.

von1xx · October 2019

@RobertLawrence kung irerenew mo merong iecep sg chapter search mo sa fb..hindi ako nagpaassess ng Electronics Engineer, pero ang pinasa ko dati sa ACS yung certificate (yung parang diploma) na registered engineer ka. Expired na din ID ko nun since hindi nagagamit dito. Antay din tayo sa iba pang nakaexp.

jakibantiles · October 2019

Hello po,

Ano po yung PLC license? PRC license kaya yun?

RobertLawrence · October 2019

Thank you po sa mga comments ninyo. Mahirap irenew license ko kasi d ako nakaabot sa CPD points which is ang mahal2x per seminar... nagtanong-tanong din ako, pwede din daw mag-paassess as Engineering Technologists kac mas fit din kac sa Job Description ko ngaun. Hindi daw kelangan ng PRC license sabi ng dalawang resource person ko..

RobertLawrence · October 2019

Type your comment
@von1xx , yan ba yung sa oath taking binibigay? Parang wala akong natanggap na ganito dati ah.
Pero pag nawala daw pwede magrequest ng bago.