GROUP: 2335 INDUSTRIAL, MECHANICAL AND PRODUCTION ENGINEERS

fortdomeng · September 2020

@anna_m said:

@Temp1 said:
Canada is easy if you have immediate relatives, education, or job offer/experience there (thru PNP option), but if none, it's a lot tougher than AU in comparable circumstances: no relatives, no local education, no job offer/experience.
Check if you can reach a CRS point of 480. That's the current minimum threshold of people getting invited in Canada.

Hi po. I actually filled up an express entry form for Canada but I don't have a job offer and the only relatives they consider is your brother or sister so my cousins living there would not be counted. Then I realized na you have to apply for skills assessment for every state you want to apply in. Tough luck pero let's see. Will the AU govt release new guidelines once mafinalize na ang 2021 budget?

Marami pang uncertainties. Abangan sa October. For now, empower yourself with knowledge and familiarise with steps to obtain points. Consider migrating to regional areas din for better chances.

dutchmilk · September 2020

@anna_m said:

@dutchmilk said:
hello! im not sure if this is the right thread but magtatanong lang in behalf of my nephew. he is a graduate of mechanical engineering and have 3 years work experience. would appreciate if meron makakabigay sakin ng information kung anong bago ngayon and the process in applying for a visa. salamat sa mga sasagot.

HI po. You can check po the immi website to know which visas would apply for your nephew. Very easy po to navigate and understand. But I guess ang dapat paghandaan nya ay ang Engineers Australia Skill Assessment. English test is common for all naman po.

hello! thanks for your reply. yeah, I already told him to check the immi website for more info and I guess, need pa niya magdagdag ng years of experience lalo na ngayon na medjo mahina ang offshore invites.

Francisco0789 · September 2020

Anyone who applied for TSS 482 and was asked for a skills assessment from EA? My employer is sponsoring my and I have been with them since March 2019, doesnt make sense if we have to get a skills assessment from a third party entity to see if I have the relevant skills to perform the job I have been doing for almost 2 years? I am currently on a student visa. Thanks mga kapatid!

RheaMARN1171933 · September 2020

@Francisco0789 said:
Anyone who applied for TSS 482 and was asked for a skills assessment from EA? My employer is sponsoring my and I have been with them since March 2019, doesnt make sense if we have to get a skills assessment from a third party entity to see if I have the relevant skills to perform the job I have been doing for almost 2 years? I am currently on a student visa. Thanks mga kapatid!

Unfortunately that’s the requirement for 482 visa. Has nothing to do with your employer, they’re trying to comply with the requirements from DHA.

Francisco0789 · September 2020

@RheaMARN1171933 said:

@Francisco0789 said:
Anyone who applied for TSS 482 and was asked for a skills assessment from EA? My employer is sponsoring my and I have been with them since March 2019, doesnt make sense if we have to get a skills assessment from a third party entity to see if I have the relevant skills to perform the job I have been doing for almost 2 years? I am currently on a student visa. Thanks mga kapatid!

Unfortunately that’s the requirement for 482 visa. Has nothing to do with your employer, they’re trying to comply with the requirements from DHA.

It's not in the mandatory skills assessment list though?

RheaMARN1171933 · September 2020

@Francisco0789 said:

@RheaMARN1171933 said:

@Francisco0789 said:
Anyone who applied for TSS 482 and was asked for a skills assessment from EA? My employer is sponsoring my and I have been with them since March 2019, doesnt make sense if we have to get a skills assessment from a third party entity to see if I have the relevant skills to perform the job I have been doing for almost 2 years? I am currently on a student visa. Thanks mga kapatid!

Unfortunately that’s the requirement for 482 visa. Has nothing to do with your employer, they’re trying to comply with the requirements from DHA.

It's not in the mandatory skills assessment list though?

You would need to discuss it with them then to clarify it. I’m pretty sure they are being guided by an immigration specialist so there must be a reason why they are asking for it.

Francisco0789 · September 2020

@RheaMARN1171933 said:

@Francisco0789 said:

@RheaMARN1171933 said:

@Francisco0789 said:
Anyone who applied for TSS 482 and was asked for a skills assessment from EA? My employer is sponsoring my and I have been with them since March 2019, doesnt make sense if we have to get a skills assessment from a third party entity to see if I have the relevant skills to perform the job I have been doing for almost 2 years? I am currently on a student visa. Thanks mga kapatid!

Unfortunately that’s the requirement for 482 visa. Has nothing to do with your employer, they’re trying to comply with the requirements from DHA.

It's not in the mandatory skills assessment list though?

You would need to discuss it with them then to clarify it. I’m pretty sure they are being guided by an immigration specialist so there must be a reason why they are asking for it.

Sorry for the confusion, I haven't lodged my application yet. I was just asking if it was a requirement as there was a comment in another thread that he, a mechanical engineer, was asked for a skills assessment, turns out he just forgot and he told me he wasnt asked for one. He had a skills assessment though and he submitted it with his application.

ememumali · September 2020

Hi Id like to ask if may chances po ba ma invite for Visa 189 if 85 pts? 233512 po 😊 thanks

jakibantiles · September 2020

@ememumali said:
Hi Id like to ask if may chances po ba ma invite for Visa 189 if 85 pts? 233512 po 😊 thanks

Hi po. Pareho po tayong ME. Been sitting on 90pts since June pero waley pa rin. Medyo unpredictable yung invitation sa atin kahit pa nasa PMSOL tayo. Try to add more points po like NAATI CCL test. All the best! 😊

Grifter · October 2020

@Francisco0789 hi. Check nyo po un invitation estimates ni iscah

https://www.iscah.com/members-www-iscah-comiscah-help/

project2100 · October 2020

hi guys, just wondering what would be your thoughts on shifting to 491 from 189/190? Given the circumstances parang ang hirap na iachieve yung 189.

stvrdlk · October 2020

Hello po. Based sa DHA website, 48 lang invited last September pero nasa 2682 yung occupation ceiling ng 2335 code. Usually po ba ginagrant lahat yang 2682 na yan para sa year na yun?

MaureenJoy · October 2020

hello po sa lahat! sino po palang IE dito baka pwede ko pong irequest makita po yung inyong CDR as reference? target ko po sanang tapusin yun habang pandemic.

At dahil po sa situation ngayon, ano po mas recommended ninyo student visa or skilled visa?

Specter · March 2022

Hello po! Mechanical Engineer po with construction management experience, dumaan na rin ako sa EA assessment luckily positive naman ang outcome kaso hindi crinedit yun years of experience ko. Question lang, safe to claim pa rin po ba ang 3.4 years of experience ko pag mag lodge ng EOI kahit hindi nakalagay sa EA assessment ko? Maraming salamat po.

datadash · August 2022

Hello
Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

Did you submit CDR only, or CDR+RSEA?

(I am a piping design engr with 8+ yrs of EPC experience in one company)

Edwardsq11516 · August 2022

Hi anyone here na Instrumentation and Control Engineer ang natapos or may kakilala at nag pa assess
as ANZSCO 233513?

datadash · August 2022

Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

04-AUG: Submitted my MSA CDR application (fast track)
23-AUG: Received a positive outcome letter

No contact with assessor. Your mileage may vary hehe.
I did not expect my application will be this fast.

My occupation and work details are quoted below.

@datadash said:
Hello
Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

Did you submit CDR only, or CDR+RSEA?

(I am a piping design engr with 8+ yrs of EPC experience in one company)