Civil Engineers Thread

se29m · March 2022

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

Lez_ · March 2022

@RheaMARN1171933 said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

Licence doesn’t have any bearing at all unless you studied from a university which isn’t listed under section 1.

It’s your preference in the end. Student visa will get you there faster but there’s no assurance you’ll get your PR. It’s an expensive pathway to PR that’s for sure. When you get there, likely you won’t get a job in your profession. You need to be prepared mentally and emotionally for this as coming to terms with doing odd jobs over there was a struggle my end when I was a student over there knowing the fact that I could get a proper job if I would be back in the Philippines.

With GSM pathway, things are slow at the moment but we’re anticipating news around May regarding migration plans for the new financial year (July 2022 to June 2023). This pathway won’t get you sooner to Australia compared to a student visa but once you’re there, Your future is more secured as you’ll be entering the country on either a PR or Provisional visa. And would be much easier to land a job within your profession. Not to mention the fact that whilst you wait for your application to progress, you’re still working back home, gaining more experience and saving money in preparation for your big move. In short, it may be a slower to step into Australia but you’re preparing for a much smoother transition.

We’ve had a number of cases where clients don’t have licence so shouldn’t be an issue as long as your degree is equivalent to an AQF bachelor degree.

Hope this helps

Thank you po. Regarding naman po sa 189, 491 or 190 visa application, hiwalay po ba na fee yan kung aapplyan ko po lahat? Thank you.

Lez_ · March 2022

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

se29m · March 2022

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Lez_ · March 2022

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

se29m · March 2022

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

sa EA , Professional Engineer Skill Level 1 tas nag positive naman

Lez_ · March 2022

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

sa EA , Professional Engineer Skill Level 1 tas nag positive naman

Wow congrats po kahit late na 😊 yung career episodes na ginawa nyo po my mga design related po ba? Based po kasi sa mga nababasa ko dapat my design related para positive ang assessment as Professional engineer. sorry po kung madaming tanong.

se29m · March 2022

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

sa EA , Professional Engineer Skill Level 1 tas nag positive naman

Wow congrats po kahit late na 😊 yung career episodes na ginawa nyo po my mga design related po ba? Based po kasi sa mga nababasa ko dapat my design related para positive ang assessment as Professional engineer. sorry po kung madaming tanong.

career episodes ko is per project na nahandle ko.. di naman kalaliman pero nagmention lang ako ng mga RFIs and RFAs sa mga drawings and structural engineering queries para masabi may design.

Enhinyera · April 2022

Hi, just wondering if there’s any news kelan magopen ang melbourne for offshore civil engineers? Thanks

Lez_ · April 2022

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

sa EA , Professional Engineer Skill Level 1 tas nag positive naman

Wow congrats po kahit late na 😊 yung career episodes na ginawa nyo po my mga design related po ba? Based po kasi sa mga nababasa ko dapat my design related para positive ang assessment as Professional engineer. sorry po kung madaming tanong.

career episodes ko is per project na nahandle ko.. di naman kalaliman pero nagmention lang ako ng mga RFIs and RFAs sa mga drawings and structural engineering queries para masabi may design.

@se29m nagpakita or naglagay din po ba kayo ng mga design calculations ?

se29m · April 2022

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:

@se29m said:

@Lez_ said:
hello po. I'm planning to go to Australia I'm a Civil engineering graduate with 4 yrs experience of work but not yet license. ano po ba ang mas ok na way? Student visa muna or mag apply for 189 or 190? Thank you po.

wala din po ako licence.. ang maipayo ko is direct PR na either 189 or 190.

thank you po. tanong ko lang din po, ano po yung nagiging factors bakit negative ang nagiging Result sa VETASSESS and yung sa EA nyo po as Professional Engineer po ba yung pina assess nyo? Thank you po

Di ko din sure bakit ako nag negative nun. dahil di ako confident at first na maging positive sa EA dahil di ako licensed and most work experiences ko nun ay project management/supervision kaya sa Vetassess ako nagpasa as a Project Builder. Pero yun nga, nag negative sa Vetassess kaya tried my luck sa EA and got the positive assessment.

Hi po @se29m, bale ano pong Occupation category ang inapplyan nyo po?

sa EA , Professional Engineer Skill Level 1 tas nag positive naman

Wow congrats po kahit late na 😊 yung career episodes na ginawa nyo po my mga design related po ba? Based po kasi sa mga nababasa ko dapat my design related para positive ang assessment as Professional engineer. sorry po kung madaming tanong.

career episodes ko is per project na nahandle ko.. di naman kalaliman pero nagmention lang ako ng mga RFIs and RFAs sa mga drawings and structural engineering queries para masabi may design.

@se29m nagpakita or naglagay din po ba kayo ng mga design calculations ?

hindi po

EricTC · April 2022

@Lez_

I'm a Structural Engineer but just to add sa paggawa ng CDR, here are my key points and what I've written:

Career episodes:
1st - First company (Research & development project)
2nd - First company (One major project)
3rd - Second company (All significant project involvements)
*I am only employed in 2 structural engineering firms in a span of 6 years
Introduction & Background

Tell your position, start date, and location of company
Tell your duties & responsibilities
Show organizational chart of the company, also highlighting your position

Content/Body

Tell specific projects wherein you exhibit all of the needed factors as outlined in the "Summary Report"
Explain the complexity of the projects
Show clips of floor plans, diagram from code standards, spreadsheets you have created, structural models you have created using engineering softwares, details you have created
Always use the first person noun/pronoun, "I did", "I have created', etc
Cite specific problems you have solved and/or unable to solve
Cite how you manage junior engineers if you hold senior role
Cite not only technical skills but also leadership & management skills as well as how you show good ethics and right conduct in the performance of your role

Summary

Summarize your key duties/objectives and how you manage to achieve them

...

In doing so, I was able to received positive result from EA within 20days (fast track route)

Lez_ · April 2022

@EricTC said:
@Lez_

I'm a Structural Engineer but just to add sa paggawa ng CDR, here are my key points and what I've written:

Career episodes:
1st - First company (Research & development project)
2nd - First company (One major project)
3rd - Second company (All significant project involvements)
*I am only employed in 2 structural engineering firms in a span of 6 years

Introduction & Background

Tell your position, start date, and location of company

Tell your duties & responsibilities

Show organizational chart of the company, also highlighting your position

Content/Body

Tell specific projects wherein you exhibit all of the needed factors as outlined in the "Summary Report"

Explain the complexity of the projects

Show clips of floor plans, diagram from code standards, spreadsheets you have created, structural models you have created using engineering softwares, details you have created

Always use the first person noun/pronoun, "I did", "I have created', etc

Cite specific problems you have solved and/or unable to solve

Cite how you manage junior engineers if you hold senior role

Cite not only technical skills but also leadership & management skills as well as how you show good ethics and right conduct in the performance of your role

Summary

Summarize your key duties/objectives and how you manage to achieve them

...

In doing so, I was able to received positive result from EA within 20days (fast track route)

Thank you po @EricTC malaking help po ito

Lightyear05 · August 2022

Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

marvinreds · September 2022

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

IamTim · September 2022

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

marvinreds · September 2022

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

yes, may mass invitation ung DHA sa civil engineer draftsperson nung aug 22. kasi may kilala ako, 65 points + offshore pero 189 invited din nung aug 22 sa CE draftsperson. di ko din expect ma invite, kaya nag pa assess din ako as civil engineer anzsco 2332 kasi pmsol daw. aug 21 ako nagpasa sa EA, then aug 22 na invite ung CE drafts, kaya naging 2 tuloy assessment sakin.

I think first batch din ung aug 22 for 189 invitation for 2022-2023. dami ko din kilalang onshore nurses nainvite nung same day. mejo lucky ung CE drafts nung time na yun..

aicu0_0 · September 2022

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

may sample cdr po ba kayo?? I am a BIM Specialist. (TEKLA and Revit)
reference lang sana for my CDR for EA Assesment

cvlantonov · September 2022

Good Day sa mga fellow Civil Engineers po dyan. I'm just new here sa Pinoyau. info

Ask ko lang san po maganda magpa assess? sa EAUST or VETASSESS? Kasi sabi sakin ng agent ko ako daw pipili kung san ko gusto mag pa assess. Hingi lang po sana ako ng advice. Thank you

songhyeky0 · September 2022

Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

cvlantonov · September 2022

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

cvlantonov · September 2022

To my fellow civil engineers, may sample po ba kayo ng CDR para sa Civil Engineer Draftsperson (312211)

Thank you

IamTim · September 2022

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

cvlantonov · September 2022

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

IamTim · September 2022

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

cvlantonov · September 2022

@IamTim said:

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

I see. Bigla ko naalala lang ksi ung dto sa office namin sa Japan, hnd ko name ung nakalagay sa drawing. yung name ng lead ko. possible kaya kahit hnd ko name nakalagay.

If required tlga ng name ko, naisip ko palitan ko nlng kaya since secret ko lng din nmn ilalabas yung drwing

IamTim · September 2022

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

I see. Bigla ko naalala lang ksi ung dto sa office namin sa Japan, hnd ko name ung nakalagay sa drawing. yung name ng lead ko. possible kaya kahit hnd ko name nakalagay.

If required tlga ng name ko, naisip ko palitan ko nlng kaya since secret ko lng din nmn ilalabas yung drwing

Hindi ko sure yung sa drawn by, pinili ko lang talaga yung merong initials ko. Pero kung sa lead nakapangalan, ok lang siguro yun. May ibang supporting documents pa naman na magsasabing nagwork ka talaga sa company at certain role.

cvlantonov · September 2022

@IamTim said:

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

I see. Bigla ko naalala lang ksi ung dto sa office namin sa Japan, hnd ko name ung nakalagay sa drawing. yung name ng lead ko. possible kaya kahit hnd ko name nakalagay.

If required tlga ng name ko, naisip ko palitan ko nlng kaya since secret ko lng din nmn ilalabas yung drwing

Hindi ko sure yung sa drawn by, pinili ko lang talaga yung merong initials ko. Pero kung sa lead nakapangalan, ok lang siguro yun. May ibang supporting documents pa naman na magsasabing nagwork ka talaga sa company at certain role.

Sabagay, tingnan ko nlng kung ano maganda gawin. Ilang company po b napasukan nyo? each company nagsubmit kayo ng drwing portfolio nyo? Tapos representative lng/company? Hnd nmn need na per project db?

IamTim · September 2022

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

I see. Bigla ko naalala lang ksi ung dto sa office namin sa Japan, hnd ko name ung nakalagay sa drawing. yung name ng lead ko. possible kaya kahit hnd ko name nakalagay.

If required tlga ng name ko, naisip ko palitan ko nlng kaya since secret ko lng din nmn ilalabas yung drwing

Hindi ko sure yung sa drawn by, pinili ko lang talaga yung merong initials ko. Pero kung sa lead nakapangalan, ok lang siguro yun. May ibang supporting documents pa naman na magsasabing nagwork ka talaga sa company at certain role.

Sabagay, tingnan ko nlng kung ano maganda gawin. Ilang company po b napasukan nyo? each company nagsubmit kayo ng drwing portfolio nyo? Tapos representative lng/company? Hnd nmn need na per project db?

Yes bawat company na may design/drafting roles na napasukan ko, nagsubmit ako ng 3 to 5 sheets. Yung pinasa ko 1 project per company tsaka pinili ko lang. Plans, sections, profile and details para may variety.

cvlantonov · September 2022

@IamTim said:

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@cvlantonov said:

@IamTim said:

@IamTim said:

@marvinreds said:

@Lightyear05 said:
Hello. Good day.

Question 1: Should I opt for VETASESS or Enginners Australia for my skills asessment?
ANZSCO CODE: 312211 - Civil Engineering Draftsperson

Question 2: Meron po bang bearing kung ano sa dalawang asessing body na to ang mag check ng credentials?

Meron akong positive assessment sa Vetassess as CE draftsperson (7.5 yrs experience) and as professional engineer CE sa EA (walang years deduction sa EA).

Sa Vetassess na lang if draftsperson, kasi cheaper and easier kasi wala na CDR. pero may deduction ang vetassess ng 1 year work experience..

I think wala namang bearing kung anong assessing body. parehas namang recognized ng DHA.

By the way nainvite ako sa Visa 189 sa Vetassess draftsperson nung Aug 22.

Same! I got invited nung Aug 22 with CE draftsperson. Mababa points ko kaya hindi ko talaga expected na mainvite ako sa visa 189. I was actually looking at visa 190/491.

As per my agent a year ago (hanggang ngayon naman siguro), mataas ang kompetensya pag Civil Engineer ang occupation at mas may chance ma-invite ang Civil Engineering draftsperson.

Mas may chance ma-invite > @cvlantonov said:

@songhyeky0 said:
Wrong information yan kabayan. Only Engineers Australia can assess ANZSCO 233211 o Civil Engineer occupation. VETASSESS cannot assess 233211.

okay. salamat po. So EAUST nlng ako. salamat. Anyway ang nominated occupation ko ay 312211 Civil Engineering Draftsperson

sa Vetassess pwede yang CE draftsperson, 10days yung fast track nila. No need CDR

I see. Pero pag vetassess required ng drawing portfolio db? ang problema ko ksi, pag vetassess ako hnd ko makukuha ung gawa ko from my previous company dahil sa Non disclosure agreement nila.

Ang ginawa ko nagpasa lang ako 3 to 5 drawings per company na walang sign/endorsement. Pinili ko mga sheets na nakalagay initials ko sa drawn by. Syempre di mo na ipapaalam sa company yan hehe

I see. Bigla ko naalala lang ksi ung dto sa office namin sa Japan, hnd ko name ung nakalagay sa drawing. yung name ng lead ko. possible kaya kahit hnd ko name nakalagay.

If required tlga ng name ko, naisip ko palitan ko nlng kaya since secret ko lng din nmn ilalabas yung drwing

Hindi ko sure yung sa drawn by, pinili ko lang talaga yung merong initials ko. Pero kung sa lead nakapangalan, ok lang siguro yun. May ibang supporting documents pa naman na magsasabing nagwork ka talaga sa company at certain role.

Sabagay, tingnan ko nlng kung ano maganda gawin. Ilang company po b napasukan nyo? each company nagsubmit kayo ng drwing portfolio nyo? Tapos representative lng/company? Hnd nmn need na per project db?

Yes bawat company na may design/drafting roles na napasukan ko, nagsubmit ako ng 3 to 5 sheets. Yung pinasa ko 1 project per company tsaka pinili ko lang. Plans, sections, profile and details para may variety.