ENGINEERS Corner

dhey_almighty · November 2015

@garfield hello...sensya na sa late reply...been busy :-)
uhm, pwede naman siya mag-apply as Production/Plant Engineer basta ang gawin niya ung COE niya e ilagay niya na Production/Plant Engineer siya...provided na same manner ung ginagawa niya...kausapin na lang niya ang pipirma sa COE niya para sure...
If i remember it right, bukod sa COE e need niya rin magpass ke EA ng job description niya bukod sa COE from the company...ang gawin na lang ng hubby mo na siya na lang ang gumawa ng job description niya sa kasalukuyang job task niya pero ilagay niya na Production/Plant Engineer siya dun at ung manager na lang niya ang papirmahin niya with contact details and so...

garfield · November 2015

@dhey_almighty thanks so much po. yon po gagawin namin regarding COE nya.

se29m · November 2015

@garfield that's what I did. Ayaw mag issue ng HR namin ng CoE with JD kaya ako yung gumawa at pinapirmahan ko sa Snr Manager namin. Well, inaantay ko pa yung results ng assessment ko but from what I read from the experiences of others, it worked. Goodluck sa application process

>-

OZwaldCobblepot · November 2015

@se29m @garfield yung COE ko sobrang generic lang stating that I'm a regular employee with my position and salary. Kaya gumawa ako JD based sa templates sa net. Then pinapirmahan ko sa immediate supervisor/manager ko. ok naman. got my positive result using that. Nilagyan ko lang ng salary, hours per week, detailed JD, and short statement signed by my manager.

garfield · November 2015

@se29m thank you. Inaalala lng namin baka tumawag ung EA sa companies.pero dnaman cguro as long as may supporting docs

garfield · November 2015

@OZwaldCobblepot thank you po.atleast madami na kming idea galing sainyu.

garfield · November 2015

@jkk32w thank you so much po for the clear advice.

IslanderndCity · November 2015

to those who PM, CDR samples sent. pasensya na sent by bulk para save time on my part

rWindEy07 · December 2015

@IslanderndCity, hi po, if you don't mind po baka pwd rn ako makahingi ng sample ng CDR ninyo, although Civil Eng'r po ako, gagawin ko lang po sana reference.

here's my email add: [email protected]

Salamat po

Margarethe07 · December 2015

Hi po! Newbie po ako and plan din po namin ni hubby mag-Oz if kakayanin po namin ung process. Matagal na din po ako nagbabasa dito sa pinoyau and napaka-informative at helpful po ng lahat. Currently po ang position ko is QS dito sa SG for more than 3 yrs pero Civil engg graduate po ako and licensed sa Pinas. Based po sa nabasa ko di daw papasa tulad ko sa AIQS if magpapa-assess ako so ang option ko is EA as Civil Engineer. Tama po ba? Ang problem ko po is CDR, pwede po ba manghingi ng copy ng CDR kung sino po ung nakapagtry na ganitong case. Ang email add ko po is [email protected]. Maraming Salamat po!!!!

rWindEy07 · December 2015

@Margarethe07, yup you are right "as civil engineer" dpt application mo kpg magssubmit ka sa EA for assessment and approval nila dahil magbabase sila sa natapos mo na degree. anyway pasok nmn sa scope of work ng CE ang QS kaya i think wala kang magiging problema dun.

Same mo rn ako, i am trying to ask some members now for quite sometime na sana my magshare ng copy pra my magamit tayo as references, although my idea na ako pra mabuo ko CDR ko pero iba pa rn kung my reliable references ka na ginagamit sna..hopefully my mgshare sna sa atin, pero we understand nmn if medyo doubt silang magshare dhil pinagrhirap din nila kc mabuo un kaya lets hope na my makatulong sa ating mga newbies na engineers

jkk32w · December 2015

@Margarethe07, yup you are right "as civil engineer" dpt application mo kpg magssubmit ka sa EA for assessment and approval nila dahil magbabase sila sa natapos mo na degree. anyway pasok nmn sa scope of work ng CE ang QS kaya i think wala kang magiging problema dun.

Same mo rn ako, i am trying to ask some members now for quite sometime na sana my magshare ng copy pra my magamit tayo as references, although my idea na ako pra mabuo ko CDR ko pero iba pa rn kung my reliable references ka na ginagamit sna..hopefully my mgshare sna sa atin, pero we understand nmn if medyo doubt silang magshare dhil pinagrhirap din nila kc mabuo un kaya lets hope na my makatulong sa ating mga newbies na engineers

i have sample IE CDRs u cn check how it was done pra may guide kau. PM me ur email adds f ur nterested.

Goodluck!

Margarethe07 · December 2015

@jkk32w thanks a lot. Yup, we can use that as guide. My email is [email protected]. Thank you very much!!!!

IslanderndCity · January 2016

@rWindEy07 sorry just read your msg. Do you still need one?

rWindEy07 · January 2016

@IslanderndCity & @jkk32w, please po i still need a sample of CDR, maraming salamat po
here's my email add: [email protected]

jkk32w · January 2016

@Margarethe07 sent! goodluck!

jkk32w · January 2016

@rWindEy07 sent! goodluck!

kaaate · January 2016

Hi everyone!

CE po ako na meron experience as project engineer (3 yrs) sa ph tapos qs sa sg (mag 2 yrs) ngayon.
Base sa nabasa ko dito sa mga thread madalang talaga makakuha ng positive assessment sa AIQS.
Nais ko mahingi ng inyong payo kung saan mas mabuti mag pa assess EA (as CE) or VETASSESS (as construction estimator)?
Maraming salamat.

aprilboyle · February 2016

hello po sa lahat. ive been trying to read the thread here.. I just want clarification po.. I know it sounds lazy but I ve been really doin thorough research on how to migrate to australia. But im still very confused. I am 40 years old. Electrical engineer but doing petroleum engineer right now for almost 15 years. What is my first step para maka migrate sa australia po. After IELTS mag pass po ba ako ng CDR? or what should i do po.

IslanderndCity · February 2016

@aprilboyle check it here
http://pinoyau.info/discussion/101/general-skilled-immigration-visa-step-by-step-process

jcs_ce · February 2016

Hello po! Matagal na po ako ng babasa basa sa thread and im hoping na may sagot sa mga tanong ko. im a c.e graduate as well as my husband ( both board passers). Gusto po sana namen malaman if possible ba kami makapag migrate sa au. We graduated since 2007 and ng trabaho po ako sa family construction business namen that time and i worked as project engineer. Pero matagal na din po kami hindi ng eengage sa construction ng concentrate kami sa nga equipment rentals. More on office/management related works po ung experience ko, ung husband ko naman in charge sa mga equipment. Eto po ung mga tanong ko.
1. San ko po ba sisimulan ung pag a apply?
2. Ano po ung documents na kailangan?
3. Possible kaya or may chance po kaya kami?
Sorry kung napa haba medyo iba po kasi ung work experience namen sa course namen kaya hindi ako sure sa dapat gawin.
Thanks in advance po..

se29m · February 2016

@jcs_ce start po kayo dun sa msa booklet ng engineers Australia.. Andun po process ng pag apply for assessment and documents checklist.. Ok lang din po siguro as long as related sa engineering or dapat mag match po sa anzsco description ng nominated occupation nyo po.. Ako po more on the construction part pero okay naman kay ea.. Search nyo po dito yung mga engineer occupations: anzscosearch good luck po..

dreamoz · February 2016

@se29m sir sa pag apply po ba sa EA assessment, i-choose "yes" po ba dun sa part ng "assessment of your elevant skilled employment"? so dito po ba nila ibabase yung "years of employment" na ibibigay sa atin? kasama po ba kahit dun sa past-10yrs na? salamat!

se29m · February 2016

@dreamoz yes po..wag na po sir. Di ako deserving hehehe

se29m · February 2016

@dreamoz correction po, ang ea yata ay iaassess kahit more than 10 yrs na experience mo, pero si dibp ang tinitingnan lang is yung past 10 years of your employment lang...

garfield · April 2016

@se29m sir ask ko lang po ung engineers na immigrant pagdating sa Aus makapag practice ba cla as engineer or need pa mag aral kagaya sa canada bago makapag practice as engineer. Thanks po

se29m · April 2016

@garfield pwede naman makapagpractice, hirap nga lang shempre competition mo is local degree..

garfield · April 2016

@garfield pwede naman makapagpractice, hirap nga lang shempre competition mo is local degree..

@se29m maraming salamat sa confirmation

dreamoz · May 2016

mukha nga pong mahirap o matagal maghanap ng engg work dyan, two pinoy engrs dito sa company namin, mga Sr Engr position na pareho; iyung isa, wife nya dito nurse, alam nyo nman maliit lng sahod dito nurse, lumipat sila dyan buong family, wife malaki sahod, pero sya wala, ngayon umaatend na ng care giver course; then yung kaalis lang 3mos ago, pero wala pa rin mhanap na work, sya lang muna pumunta dyan, wife nya still working here sa SG

greysworld123 · May 2016

Sir hello po..ask ko lang po.. kasi hubby is the principal applicant and he is BS ECE grad sa TIP with 7 yrs of Exp in UAE as Technician/Electronics Technician, more on Aircraft Technician po kasi ung 5 yrs nya po is sa Thermal Imaging ng Aircraft and currently asa aviation company po sha.. ques po is;

1. Sa EA po ba dapat sha pa assess? as Engineer or Technologist po? or dapat technician po tlg?
2. if EA po tlg, me sinsabing pathway po dun, ano po ba ang pathway nya?
3. Ano po ba ang dapat nameng i prepare na docs to be submitted for EA?
4. If technician naman po, pasok po ba sha as Electronics Trades worker? mas okay po ba na Electronic trades worker or as Electronics engineer?

Salmat po and pasensha na