Architect - Applying as Architectural Draftsperson

Azriel · September 2015

@Anino78 wait nyo lang. mag oopen din yan next yr ung ACT baka FEb pero ang reshuffle talga is 1 July lagi, un kasi ung start financila yr nila at nagoopen ung job vacancies ng every 1 July. and ung WA, last sila nag open was in 2013 pa. baka next yr mag open na rin sila. or NT try nyo.

Xiaomau82 · September 2015

Sana magbukas by next year ung ibang state sa field natin. May possibility ba na magbukas ung ibang state by January next year?

monitor nio lang ung sa ACT kasi every now and then pag nag a update, kasama sa list minsan ung arch. draftsperson.

Dukee · September 2015

Nag submit na ako ng eoi sa WA, NT at TAS. Try ko lang ng maraming EOI kasi allowed naman.

Anino78 · September 2015

@Dukee pwede po ba un kahit hindi open ung skill natin sa WA? pwede pa rin magsubmit.

Dukee · September 2015

@Anino78 i think its fine, nagsubmit lang ako baka sakali magkaroon ng opening. Ipila lang natin sa WA baka sakali mapansin nila na interesado tayo sa territory na yun.

Anino78 · January 2016

@Dukee musta na sir? may natanggap ka ng invite? ako nagpprepare pa lng ng EOI for NSW sana.

bubuyog · January 2016

Hi. I'm new in the forum. Tanung ko lang po kung wala ba nagtry magpa-assess na Architect ang skill? Pasulpot sulpot lang kasi yun architectural draftsperson eh. Para sana may iba pa tayo option sa field natin. Thanks.

pausatio · January 2016

@bubuyog ako sir, since experience ko sa gencon, nakapg apply ako ng civil engineering draftsperson...kung maka 60pts, allowed sa visa 189. pero 55pts lng ako, fortunately, kasama nmn sa list ng nsw kaya nainvite namn ako sa nsw for visa 190. goodluck! check mo lng list n pwede sa job description mo or anything related sa work basta makapgprovide ka ng documents gaya ng coe at payslips..

bubuyog · January 2016

@pausatio gano kahaba experience mo sa gencon? May structural drafting experience din ako pero hinde ko alam kung ma-count ba sya. I also worked sa gencon but my position was architect. So if nakalagay sa coe yun roles na related say sa civil engineering, ok lang ba yun kahit architectural draftsperson ang position? Thanks!

P.S. Ate po ako at hinde sir.

pausatio · January 2016

@bubuyog 10 yearsn ko sir, tpos ang vetassess ngayon deduction of 1 year n sa experience of work. Nung magrequest ako sa company nmin, pinalagay ko din n civil engr draftsperson although all all around ang drafting works ko. At architect n din ang position ng id ko dahil promoted in time. Hehhe.. Im not sure pero, dagdag idea for you, maraming nag aapply ng with zero pt sa experience dahil hindi umabot sa 3 years atleast..basta related ang work mo. Tsaka makakuha k ng mataas n points sa english. Risky lng dahil medyo mahal ang pa assess.. Kung makakapagrequest k ulet ng coe, may format din kasi sir kaya bka kailanganin mo din kumuha, eh kung pede mailagay ang position sa coe as you desired position pede siguro. Hehhe..pero chek mo din bka magreflect sa payslip ang position at d magmatch. Magcheck k p sir sa sol at csol, bka may iba pang magmatch sa ibang work experience mo kahit few years lng experience, bawi n lng sa ielts/pte points

pausatio · January 2016

@bubuyog pwede rin pong magpa assess n kyo sa vetassess as archl draftsperson, kasi 3 years nmn valid yun, para anytime magkaron ng opening pasa n lng agad kyo.. 3 months din kasi ang waiting sa vetassess. good luck po

bubuyog · January 2016

@pausatio salamat po sa ideas and tips. Actually, nakapagpa-assess na ko sa vetasses nung unang panahon na archl technician pa ang archl draftsperson at ok naman results.
Paulit ulit ko na nga tiningnan yun sol at csol kung ano pa pedeng options. Good for you na nakuha mo yung civil engr draftsperson. Sana kame din.

bubuyog · January 2016

@pausatio tanong ko po pala tungkol sa coe nyu. So ang position na pinalagay nyu is architect/civil engr draftsperson? Or architect pa din position pero kasama lang sa job scope ang ce drafting? At ilang years experience po ang binigay ng vetassess sayo?

pausatio · January 2016

Ce draftsperson lang. At hindi ko n rin isinama sa resume ko yung ibang work experience ko para bawas asikaso ng mga proof. Heheh

bubuyog · February 2016

@pausatio Olrayt! Salamat sa pagshare ng iyong strategies.

Dukee · February 2016

@Dukee musta na sir? may natanggap ka ng invite? ako nagpprepare pa lng ng EOI for NSW sana.

@Anino78 Last year pa ako nag submit ng EOI Sept pa pero hanggang ngayon wala pa ako natatanggap na invite sa TAS at NT ako nagsubmit ng EOI.
Ikaw ba ano na balita?

Dukee · February 2016

@Anino78 walang opening ang NSW sa arch'l draftsman. Check mo sa Anszco https://www.anzscosearch.com/312111.php

Anino78 · February 2016

@Dukee oo nga sir. And naka-emphasize pa nga na ndi na sila tumatanggap ng archi draftsperson. pero still trying my luck kasi ang daming opening sa sydney and actually ung office ng bayaw ko nag-hhire din kaya lng PR hanap nila. Still praying na sana mag-open bigla ang NSW sa arch'l draftsman.

mylagador · April 2016

@pausatio Hi po. I saw that you applied on your own also. I am an Architect and currently in Dubai now, I am also searching for agents and found out na ang mahal ng fees nila, ranging from 60k to 140k pesos. My friend suggested na I'll apply my own nlng daw. But I don't know how to do it. I hope you can help me. I'm also confused kung mg apply ba ako as draftsman or as architect. If so, what will should I do to start my application. Preparation is still zero. I also need to take IELTS pa. Thank you po.

pausatio · April 2016

@mylagador you cant apply for architect kasi hindi qualified and education ng philippine arhitect sa australia... but you can apply as draftsperson in any field.. depend on your job description.. after assessing your skill, chek mo kung open ang job n yun per state.. then go to the assessing body, usually for draftsperson.. vetassess.. you can take ielts pag possitive na result sa assessing body mo, or you can take it now kasi 3 years nmn expiration. read more if you want to enlighten.. it took me almost a year back reading almost all topic here in the forum..

this link will also help you..the process and the reqd documents...
http://www.border.gov.au/

goodluck

malt · April 2016

hello po. Meron na po ba naka experienced dito na Architect pero mag pa-assess as Building Associate? Nakapasa npo kmi ng Architectural draftsperson kya lang hindi na namin naabot ang SS ng WA dati kaya rest na muna. We're planning SS ng VIC as building associate naman. Pero wala lang po ako makita dito sa forum na architect nag pa assess as building associate. Any inputs naman po. Salamat

engineer20 · April 2016

di na ba open sa ACT ang arki draftperson?

archbunki · April 2016

@malt sir iba po kasi curriculum natin with aussie mahirap na mapatuyan na architect even we are cause our coe should indicate there na architect tayu. Pero kasi if we worked under company usually arch assitant or designer ang title natin.

I have a friend nag pa assessed as architect po di nakapasa sobrang sayang sa bayad.
Pero pag may masteral kayu sir try nyu dn po.

I think the surest is arch draftsman. Yn dn ang suggestion sakin ng dati colleague na nasa aussie na ngaun.