Engineers Australia Skills Assessment

nashmacoy101 · September 2020

@GreyM said:
Hello! Medyo nalilito lang ako at kailangan ko po ng inyong tulong. Sa mga nabasa ko dito, practical ang Standard Competency Demonstration Report Assessment dahil mas mura. Pero tama ba ang interpretation ko na aside from the cost, they differ in requirements such that the only requirement in the Standard is "Reference letter or certificate of employment from the employer (on official company letterhead, stating your title/position, commencement and termination dates of employment, signed and dated by the author)" whereas in RSEA, that and id need secondary documents stated in the MSA booklet? Sorry kung medyo stupid ang question ko. Nahihirapan kasi ako sa secondary documents eh. Hirap maghanap. Lalo na ung sa Pinas pa.

yes about sa standard CDR. pero if you will claim experience points for visa application hahanapin ka din ng DHA. kaya if I were you, kelan makakuha ka pa rin. also, kapag ung diniscuss mong career episode is nagwowork ka sa company na un, you need to provide the secondary requirements as well.

GreyM · September 2020

@nashmacoy101 said:

@GreyM said:
Hello! Medyo nalilito lang ako at kailangan ko po ng inyong tulong. Sa mga nabasa ko dito, practical ang Standard Competency Demonstration Report Assessment dahil mas mura. Pero tama ba ang interpretation ko na aside from the cost, they differ in requirements such that the only requirement in the Standard is "Reference letter or certificate of employment from the employer (on official company letterhead, stating your title/position, commencement and termination dates of employment, signed and dated by the author)" whereas in RSEA, that and id need secondary documents stated in the MSA booklet? Sorry kung medyo stupid ang question ko. Nahihirapan kasi ako sa secondary documents eh. Hirap maghanap. Lalo na ung sa Pinas pa.

yes about sa standard CDR. pero if you will claim experience points for visa application hahanapin ka din ng DHA. kaya if I were you, kelan makakuha ka pa rin. also, kapag ung diniscuss mong career episode is nagwowork ka sa company na un, you need to provide the secondary requirements as well.

Thank you Nash! So kailangan pa din pala both in assessment stage and visa application. One more thing po, ano ang difference ng itsura ng Employment Reference sa Standard and sa RSEA? Sa Standard kailangan naka state din in detail ang mga duties and responsibilities or sa RSEA lang po? Thank you again.

Chuchu_88 · September 2020

Hello po, Im new here..

Pwede po makahingi ng sample cdr for reference lang po.

ito po email add ko: [email protected]

Thank you po ng marami.

Aya20 · October 2020

Magandang hapon mga kabayan! After more than 3 months of waiting finally natanggap ko na din po ang assessment ko from EA..ako po yung nagtanong dati na if may same case sakin na hinihingan ng prc license at walang maiprovide kasi wla naman po talagang board exam ang course namin..So ngayon po positive nmn po yung outcome under Engineering Technologist kaso po hinde bachelors degree ang binigay kundi advanced diploma/associate degree..Pwede ko pa po ba ilaban ito na maging BS? May same case po ba na tulad sakin? San po ba sya papasok na qualifications kung sakali? Ang alam ko po kasi ang min. requirement ng ET ay bachelors degree Pasensya po sa napakahabang message...Salamat po sa mga tutugon...

rodmarsantoalla10 · October 2020

@silverbullet said:

@jovelyn said:

@zekemadr said:

@EmpiMix12 said:

>

Hi sir, pwde pahelp ako? Civil Engineer din ako.

Shoot your questions here so we can help other civil engineers with the same question. I'm happy to answer it with the best of my knowledge.

@zekemadr baka may sample po kayong CDR for civil engineer pang reference lng po sana. salamat po in advance

Heto po email ko : [email protected]

Nag padala na po ako ng sample cdr na meron ako para a civil. hehe good luck to.

sir baka po pwede din magpasend ng sample CDR for CE. Salamat po. [email protected]

rcomabig28 · October 2020

good am sir! Baka pwede din magpasend ng sample CDR? thank you po! [email protected]

Jacraye · October 2020

@Aya20 said:
Magandang hapon mga kabayan! After more than 3 months of waiting finally natanggap ko na din po ang assessment ko from EA..ako po yung nagtanong dati na if may same case sakin na hinihingan ng prc license at walang maiprovide kasi wla naman po talagang board exam ang course namin..So ngayon po positive nmn po yung outcome under Engineering Technologist kaso po hinde bachelors degree ang binigay kundi advanced diploma/associate degree..Pwede ko pa po ba ilaban ito na maging BS? May same case po ba na tulad sakin? San po ba sya papasok na qualifications kung sakali? Ang alam ko po kasi ang min. requirement ng ET ay bachelors degree Pasensya po sa napakahabang message...Salamat po sa mga tutugon...

Baka yung school mo kung saan ka graduate falls under section 2-3 of recognized institutions?

Aya20 · October 2020

Yun nga po nasa section 2 nagfall ang school ko pero nacredit lahat ng experience ko tapos naassessed din ako under engineering technologist e ang minimum requirement po nun dapat BS...nakakapagtaka lng po...tska may mga kaklase na din ako na nasa Australia na wala naman naging problema nung time nila...siguro talagang naghigpit na sila ngayon...

rcomabig28 · October 2020

@Christian_Ereno said:
Hello po. Sa mga Transmission Planning Electrical Engineers na nakapagsubmit na po ng CDR, pwede po ba akong makahingi ng copy ng CDR niyo for my reference. Salamat po.

hello sir! makikisabay na lang din po ako. hopefully meron. [email protected]

mhonbernal · October 2020

meron po kayang naka experience mag pa Assess sa EA (FAST TRACK)??? gaano po kaya katagal? nag bayad po kasi ako fast track assessment Oct 1 and hoping lumabas din agad result this week.

mhonbernal · October 2020

@kimpossible said:
Good day! Anyone here who has just recently submitted their application? Iniisip ko po kasi kung kukunin ko yung fast track nila or no need na. Kasi ang turnaround time pag regular daw is 9 weeks, ang di ko lang sure e kung totoong 9 weeks lang ba or mas matagal pa kaya?

Thanks in advance!

Ako sir, nag lodge po Oct 1, 2020 waiting for positive assessment (fast track) ung sa agengy ng friend ko, nag fast track after 1 week me result npo, so hoping din ako n mag ka positive result by Oct 8, 2020.

datini · October 2020

Good day po sa lahat. Ask ko lang kng may nka experience na walang nainclude na CPD pero successful pa din sa assessment. Ung husband ko kasi walang records ng CPD. Malaki kaya ang impact nun sa assessment? TIA.

silverbullet · October 2020

@mhonbernal said:

@kimpossible said:
Good day! Anyone here who has just recently submitted their application? Iniisip ko po kasi kung kukunin ko yung fast track nila or no need na. Kasi ang turnaround time pag regular daw is 9 weeks, ang di ko lang sure e kung totoong 9 weeks lang ba or mas matagal pa kaya?

Thanks in advance!

Ako sir, nag lodge po Oct 1, 2020 waiting for positive assessment (fast track) ung sa agengy ng friend ko, nag fast track after 1 week me result npo, so hoping din ako n mag ka positive result by Oct 8, 2020.

Depende po sa kanila, aasikasuhin nila ito within 20 business days.
Tapos, kapag meron pa sila hiningi na karagdagan dokumento, iba pa yun. Really depends sa knila.
Yung sakin ika-19 business days ata lumabas. Tapos humingi sila ng additional docs and rewrite ng CDR.
Pero nun naipasa ko naman itong mga hiningi nila, within 24hrs nag response sila agad. Makikita mo ang timeline ng sa akin sa signature ko.
Meron naman mga iba na total of 3mons na un application nila fast track na iyon. So depende tlg kanila.
Goodlucks. Dont waste too much time thinking of it, focus ka sa ibang bagay para mapabilis pa ibang requirements. Once meron nang outcome yan, meron yan silang email sa registered email mo. Whether positive, negative or asking for addt’l docs.

silverbullet · October 2020

@kimpossible said:
Good day! Anyone here who has just recently submitted their application? Iniisip ko po kasi kung kukunin ko yung fast track nila or no need na. Kasi ang turnaround time pag regular daw is 9 weeks, ang di ko lang sure e kung totoong 9 weeks lang ba or mas matagal pa kaya?

Thanks in advance!

Kung ako po sa inyo, mag papa-fast track nalang ako. Additional around 300 aud ito. Pra shorten ang pag hihintay ninyo. Depende yan sa knila kung sosobra sa siyam na linggo. Kasi minsan, ika 8 weeks nyo na hiningian kayo ng karagdagang dokumento, additional ulit un na pag hihintay. So ang aking maipapyo ay mag fast track nalang.

silverbullet · October 2020

@datini said:
Good day po sa lahat. Ask ko lang kng may nka experience na walang nainclude na CPD pero successful pa din sa assessment. Ung husband ko kasi walang records ng CPD. Malaki kaya ang impact nun sa assessment? TIA.

Meron early discussion about dito. Back read po kayo.

silverbullet · October 2020

@rodmarsantoalla10 said:

@silverbullet said:

@jovelyn said:

@zekemadr said:

@EmpiMix12 said:

>

Hi sir, pwde pahelp ako? Civil Engineer din ako.

Shoot your questions here so we can help other civil engineers with the same question. I'm happy to answer it with the best of my knowledge.

@zekemadr baka may sample po kayong CDR for civil engineer pang reference lng po sana. salamat po in advance

Heto po email ko : [email protected]

Nag padala na po ako ng sample cdr na meron ako para a civil. hehe good luck to.

sir baka po pwede din magpasend ng sample CDR for CE. Salamat po. [email protected]

Will send to tonight sir ! Paalala po, huwag po ito gayahin, gawin lamang po itong gabay sa inyo pag susulat.

silverbullet · October 2020

@rcomabig28 said:
good am sir! Baka pwede din magpasend ng sample CDR? thank you po! [email protected]

[email protected] [email protected] CDR sent!

MumVeng · October 2020

@GreyM, kung plano nyo pong mag-RSEA, gawin nyo na lang po yan na isang letter for each employer that has all the details.

@datini said:
Good day po sa lahat. Ask ko lang kng may nka experience na walang nainclude na CPD pero successful pa din sa assessment. Ung husband ko kasi walang records ng CPD. Malaki kaya ang impact nun sa assessment? TIA.

Requirement po ang CPD. Hindi naman po ito limited sa formal studies or seminars and trainings. Pwede din po self-study, online courses, books you read, standards that you had to read as part of your work.
Kung wala po talaga, simulan nyo na ngayon. Meron po ang EA na free CPD courses. You can also check Schneider Energy university para sa mga easy to complete courses that you can add to your husband's CPD.

MumVeng · October 2020

Para po sa mga naghahanap ng pwede idagdag sa CPD.

https://www.schneideruniversities.com/
https://www.reed.co.uk/courses/free/engineering
https://mycpd.engineersaustralia.org.au/

Ameera10 · October 2020

Good day po mga Sir/Maam,

Silent reader po... ECE graduate po ako pero background ng work ko ay Production Engineer, Planing and Process improvement then knowledgeable din po sa CNC machine. Baka po pwede din po makahingi ng sample ng CDR.

Thank you in advance.

[email protected]

kath_cudal · October 2020

Good Day Sir/Ma'am,

Pwede po makahingi ng copy ng CDR sample for chemical engineers. I have experience working in sewage treatment plant.

Thank you in advance.

[email protected]

Christian_Ereno · October 2020

Pwede rin po pahingi ng sample CDR? Salamat!
[email protected]

EM27 · October 2020

Hi, ECE graduate po ako, hindi po ako licensed ECE. Tatanong ko lang po sana kung may naassess po ba dito from sec 3 school as Professional Engineer na hindi rin po licensed?
Thank you

EngrCyAlex · October 2020

Hi. Ask ko lang po. If gsis po ako and not sss, anyone po na may alam pano makakuha ng copy ng contribution po sa gsis?

mhonbernal · October 2020

@silverbullet

thanks for the input sir, wait nlang din po ako ng feedback nila… try ko din po magpa taas ng PTE kasi competent lang din po ako all 60

claireang · October 2020

Hi everyone! Hope all is well. Magcoconsult po sana ako if possible po magpa-assess into two different ANZCODEs? If yes, dapat po ba totally separate yung CEs na gagamitin ko for the 2nd assessment? Originally BsChE graduate pero working as Pipeline Engineer. Base sa booklet, parang Civil Engineer and Mechanical Engineer po applicable. Previously, trny ko magpa assess as Civil Engineer pero Engineering Technologist yung na approve. Ngayon ineexplore ko po sana if worth it po kaya magtry ng second assessment as Mechanical engineer since nasa PMSOL siya? Or as Engineering Technologist na experienced in pipeline engineering, pwede pa rin maconsider sa PMSOL if they deem na ang experience ko ay leaning towards mechanical engineering design of pipelinea. Thank you po in advance sa mga makakasagot / may ma shashare na insights.

Piper003 · October 2020

Hi po, bago lang ako sa thread na ito. (Just exploring other options 🙂). Licensed Electronics Engineer po ako pero IT ang experience ko. Possible po ba magkaroon ng positive outcome kahit walang work experience sa Electronics Engineering? Thank you!

Ameera10 · October 2020

Hello po ulit.. Baka po pwede po makahingi po ng sample ng CDR po...

-Thank you in advance po.

[email protected]

ThisIsIt · October 2020

Hello! matanung lang po kung mandatory na po ba ang "Relevant Skilled Employment Assessment" sa pagprocess ng visa 189?
I didn't avail this "Relevant Skilled Employment Assessment" because I'm pretty sure po na relavant po yung employment at job description ko sa ANZSCO code ko and i already have positive skills asssessment.

nashmacoy101 · October 2020

@ThisIsIt said:
Hello! matanung lang po kung mandatory na po ba ang "Relevant Skilled Employment Assessment" sa pagprocess ng visa 189?
I didn't avail this "Relevant Skilled Employment Assessment" because I'm pretty sure po na relavant po yung employment at job description ko sa ANZSCO code ko and i already have positive skills asssessment.

Not mandatory. Go ahead. I know some of my friends na hindi nagpaRSEA pero na grant naman sila.