Engineers Australia Skills Assessment

mswinterautumn

@reemon said:

@mswinterautumn said:

@reemon said:

@sabina12 said:
Hi po. Another question po. To those who used Pagibig/sss/philhealth as seconday doc, pano po preferable na way ng pagcapture? snapshot ng page or save page as pdf? Thanks po uli in advance

Hi @sabina12 , in may case, save page as pdf for pag ibig and philhealth. Yung sss, screenshot lang ginawa ko.

hello po bale sinend nyo po sss, philhealth and pagibig lahat as your secondary document? thank you po

Yes, I submitted all docs mentioned. Nirequest kasi yan ng EA assessor sakin pero naka indicate sa message ni assessor na "any of the ff docs" lang, but since meron ako lahat nyan, pinasa ko lahat.

@reemon said:

@mswinterautumn said:

@reemon said:

@sabina12 said:
Hi po. Another question po. To those who used Pagibig/sss/philhealth as seconday doc, pano po preferable na way ng pagcapture? snapshot ng page or save page as pdf? Thanks po uli in advance

Hi @sabina12 , in may case, save page as pdf for pag ibig and philhealth. Yung sss, screenshot lang ginawa ko.

hello po bale sinend nyo po sss, philhealth and pagibig lahat as your secondary document? thank you po

Yes, I submitted all docs mentioned. Nirequest kasi yan ng EA assessor sakin pero naka indicate sa message ni assessor na "any of the ff docs" lang, but since meron ako lahat nyan, pinasa ko lahat.

thank you po for the response 😊

mswinterautumn

Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

ispidprik

@mswinterautumn said:
Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

Many say pde pa dn nman as long as you can prove it kay home affairs later on. But its sort of a risk dn bka mg-over claim ka ng points and that can lead to refusal. Usually RSEA is used pang-back up sa work experience claim sa points. We’ll for me better consult a migration agent/lawyer para ma-guide ka nila.

mswinterautumn

@ispidprik said:

@mswinterautumn said:
Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

Many say pde pa dn nman as long as you can prove it kay home affairs later on. But its sort of a risk dn bka mg-over claim ka ng points and that can lead to refusal. Usually RSEA is used pang-back up sa work experience claim sa points. We’ll for me better consult a migration agent/lawyer para ma-guide ka nila.

Kaya nga po. may nakita kc akong nagsabi they did not avail the RSEA.. CDR lang and yet nung ngfile sila ng EOI umok nmn. prang nakasama pa ata na ngRSEA. kasama pa nmn sya sa papel ng CDR ko po. I can't just not show it in case they ask for my supporting document sa result ko sa CDR. Pano kaya? Huhuhu Thank you po pla sa pagsagot

Sana po may makatulong pa sa pagsagot sakin. salamat po ng mdme.

ispidprik

@mswinterautumn said:

@ispidprik said:

@mswinterautumn said:
Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

Many say pde pa dn nman as long as you can prove it kay home affairs later on. But its sort of a risk dn bka mg-over claim ka ng points and that can lead to refusal. Usually RSEA is used pang-back up sa work experience claim sa points. We’ll for me better consult a migration agent/lawyer para ma-guide ka nila.

Kaya nga po. may nakita kc akong nagsabi they did not avail the RSEA.. CDR lang and yet nung ngfile sila ng EOI umok nmn. prang nakasama pa ata na ngRSEA. kasama pa nmn sya sa papel ng CDR ko po. I can't just not show it in case they ask for my supporting document sa result ko sa CDR. Pano kaya? Huhuhu Thank you po pla sa pagsagot

Sana po may makatulong pa sa pagsagot sakin. salamat po ng mdme.

Better consult a migration agent/lawyer who has vast experience on this they’ll know better sa dami ng cases na nahandle nila and they probably know now how to go about it. Goodluck!

mswinterautumn

@ispidprik said:

@mswinterautumn said:

@ispidprik said:

@mswinterautumn said:
Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

Many say pde pa dn nman as long as you can prove it kay home affairs later on. But its sort of a risk dn bka mg-over claim ka ng points and that can lead to refusal. Usually RSEA is used pang-back up sa work experience claim sa points. We’ll for me better consult a migration agent/lawyer para ma-guide ka nila.

Kaya nga po. may nakita kc akong nagsabi they did not avail the RSEA.. CDR lang and yet nung ngfile sila ng EOI umok nmn. prang nakasama pa ata na ngRSEA. kasama pa nmn sya sa papel ng CDR ko po. I can't just not show it in case they ask for my supporting document sa result ko sa CDR. Pano kaya? Huhuhu Thank you po pla sa pagsagot

Sana po may makatulong pa sa pagsagot sakin. salamat po ng mdme.

Better consult a migration agent/lawyer who has vast experience on this they’ll know better sa dami ng cases na nahandle nila and they probably know now how to go about it. Goodluck!

okay na po pla. huhu mali yung intindi ko po sa result.. thank you po ng mdme sa lahat ng tumulong po and sumagot sa questions ko po 🤗🥰

RheaMARN1171933

@mswinterautumn said:

@ispidprik said:

@mswinterautumn said:

@ispidprik said:

@mswinterautumn said:
Hello mam/sir! I just received my results from EA and I got the ff:

Prof Engineer- Civil Engineer
Bachelor Degree for the Qualification

.. However, I got Nil in Relevant Skilled Employment Assessment. Does that mean.. I can't get any points for my Work Experience outside Australia?

Thank you in advance.

Many say pde pa dn nman as long as you can prove it kay home affairs later on. But its sort of a risk dn bka mg-over claim ka ng points and that can lead to refusal. Usually RSEA is used pang-back up sa work experience claim sa points. We’ll for me better consult a migration agent/lawyer para ma-guide ka nila.

Kaya nga po. may nakita kc akong nagsabi they did not avail the RSEA.. CDR lang and yet nung ngfile sila ng EOI umok nmn. prang nakasama pa ata na ngRSEA. kasama pa nmn sya sa papel ng CDR ko po. I can't just not show it in case they ask for my supporting document sa result ko sa CDR. Pano kaya? Huhuhu Thank you po pla sa pagsagot

Sana po may makatulong pa sa pagsagot sakin. salamat po ng mdme.

Better consult a migration agent/lawyer who has vast experience on this they’ll know better sa dami ng cases na nahandle nila and they probably know now how to go about it. Goodluck!

okay na po pla. huhu mali yung intindi ko po sa result.. thank you po ng mdme sa lahat ng tumulong po and sumagot sa questions ko po 🤗🥰

Basically, it’s hard to understand why NIL yung experience without seeing the actual outcome. You’ll need to ask EA the reason why. Either you really didn’t meet the ANZSCO defined occupation tasks or insufficient evidences.

At your own risk if you want to claim experience still. Based on the limited information given in your post, I will have second thoughts claiming work experience if I were you. Firstly, you were assessed and they didn’t recognise your work. That will be alarm bells for the case officer handling your visa application. You can’t compare such situation to those who didn’t do RSEA.

Lightyear05

@marvinreds said:

@Unsullied_06 said:

@marvinreds said:
hi po. ask ko lang po kung pwede po ba ako magpa assessment din ng Civil Engineer na ANZSCO sa engineers australia? positive kaya po? worry kasi ako po na baka di maapprove kasi meron na kong assessment sa Vetassess na Civil Engineer Draftsperson na 8 years positive assessment.

Interested din sana ako sa Civil Engineer kasi graduate naman ako ng BSCE, with PRC license. kaso lang nasa BIM modeling yung experience ko kasi e kaya sa draftsperson muna ako nagpassess. Meron naman ako 1 year experience as structural engineer. Enough na po kaya para ma positive assessment sa EA? Thanks po..

Hello Sir @marvinreds curious lang po bakit magpapaassess pa kayo sa EA? Ilan po points niyo ba pag CE Draftperson yung nominated occupation (NO)? Tama po ba ko iniisip pag nag-CE kayo na NO c/o EA eh wala kayo maclaim na points for work expi? O subukan niyo din paassess?

Hello po, 85 points lang po lahat for 189 sa CE draftsperson nomination kasi asses ng vetassess ay 8 years, puro BIM kasi yung dumating na opportunities sakin dito sa sg po. then subukan ko lang siguro magpaassess din sa EA for CE naman, pero not sure kung full 8 yrs din ibigay. mas maganda and mas demand kasi ung CE kaysa CED po. balak ko po mag file ng 2 eoi na CE and CED.

BSCE din po tinapos niyo?

datadash

Hello
Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

Did you submit CDR only, or CDR+RSEA?

(I am a piping design engr with 8+ yrs of EPC experience in one company)

Lightyear05

Good day po. ask ko lang sana kung saang regional state (491) may malaking chance makakuha ng work for Civil Eng'g Draftspersons.

Gusto ko lng po sna makakuha ng insights, kung saang State pinaka viable.

Maraming salamat po.

RheaMARN1171933

@Lightyear05 said:
Good day po. ask ko lang sana kung saang regional state (491) may malaking chance makakuha ng work for Civil Eng'g Draftspersons.

Gusto ko lng po sna makakuha ng insights, kung saang State pinaka viable.

Maraming salamat po.

As long as the occupation is on their list then it should be viable. There’s no way anyone can predict which area has a higher chances of getting a job as job hunting involves other factors ie how you sell yourself in the interview, who you’re competing against with for the role, etc

Jay75

Question lang po. If mag susubmit po ng CDR. ano po occupation categories na nilagay nyo? (Professional Engr, Engineering Tech, Eng'g Associate)

I have 7 years working experience as Design Engineer in manufacturing company.

Failed po kasi ako sa Professional Engr category. Yan kasi advise ng agency.

Anyone here same experience? Thank you!

ispidprik

@Jay75 said:
Question lang po. If mag susubmit po ng CDR. ano po occupation categories na nilagay nyo? (Professional Engr, Engineering Tech, Eng'g Associate)

I have 7 years working experience as Design Engineer in manufacturing company.

Failed po kasi ako sa Professional Engr category. Yan kasi advise ng agency.

Anyone here same experience? Thank you!

May we know anong eng’g profession are you applying to get assessed? I’m a mechanical engineer but have planning engineer and maintenance works as the bulk of my experience. But i do have projects which required me to use my M.E skills as per EA and anzsco code. It’s just a matter or framing your career episodes to fit in the requirement and provide proof of mechanical engineering education and qualification sa work. I suggest you revisit your JD vs EA and your nominated anzsco code to verify if you can make it work and apply for professional engineer. Hopebit makes sense and goodluck!

Jay75

@ispidprik said:

@Jay75 said:
Question lang po. If mag susubmit po ng CDR. ano po occupation categories na nilagay nyo? (Professional Engr, Engineering Tech, Eng'g Associate)

I have 7 years working experience as Design Engineer in manufacturing company.

Failed po kasi ako sa Professional Engr category. Yan kasi advise ng agency.

Anyone here same experience? Thank you!

May we know anong eng’g profession are you applying to get assessed? I’m a mechanical engineer but have planning engineer and maintenance works as the bulk of my experience. But i do have projects which required me to use my M.E skills as per EA and anzsco code. It’s just a matter or framing your career episodes to fit in the requirement and provide proof of mechanical engineering education and qualification sa work. I suggest you revisit your JD vs EA and your nominated anzsco code to verify if you can make it work and apply for professional engineer. Hopebit makes sense and goodluck!

Hi Sir, I'm a Mechanical Design Engineer of airconditioning units.

Medyo nag alangan ako sa assessment ng agency ko na mag apply for Professional Engineer. Which is yung CDR na ginawa ko, sa tingin ko is for engineering associate. Ayun. Pina pa revise ng EA. So ok lang naman sir kahit anong category basta ma assess k ng EA then maRecognize? Thanks

RheaMARN1171933

@Jay75 said:

@ispidprik said:

@Jay75 said:
Question lang po. If mag susubmit po ng CDR. ano po occupation categories na nilagay nyo? (Professional Engr, Engineering Tech, Eng'g Associate)

I have 7 years working experience as Design Engineer in manufacturing company.

Failed po kasi ako sa Professional Engr category. Yan kasi advise ng agency.

Anyone here same experience? Thank you!

May we know anong eng’g profession are you applying to get assessed? I’m a mechanical engineer but have planning engineer and maintenance works as the bulk of my experience. But i do have projects which required me to use my M.E skills as per EA and anzsco code. It’s just a matter or framing your career episodes to fit in the requirement and provide proof of mechanical engineering education and qualification sa work. I suggest you revisit your JD vs EA and your nominated anzsco code to verify if you can make it work and apply for professional engineer. Hopebit makes sense and goodluck!

Hi Sir, I'm a Mechanical Design Engineer of airconditioning units.

Medyo nag alangan ako sa assessment ng agency ko na mag apply for Professional Engineer. Which is yung CDR na ginawa ko, sa tingin ko is for engineering associate. Ayun. Pina pa revise ng EA. So ok lang naman sir kahit anong category basta ma assess k ng EA then maRecognize? Thanks

Have you looked at job description for air conditioning and refrigeration mechanic? If you haven’t, I suggest you check if duties under this occupation match what you do.

greenlight_13

Hello po good day sa inyong lahat!
Meron po kaya dito na relate yung experience sa akin at na.approved yung migration skill assessment sa EA. I was a registered electrical engineer (REE) with 10 years of experience sa building design and construction. Yung skill ko is both have technical and drafting. I plan to take skill assestment as professional engineer. If meron po pa share naman po ng inyong experience sa EA thank you!
PRC License: REE
Work experience:
2 years as Field Engineer in Electrical Works, 4 years as BIM specialist and 4 years as technical executive M&E sa consultancy company.

Edwardsq11516

Hi anyone here na Instrumentation and Control Engineer ang natapos or may kakilala at nag pa assess
as ANZSCO 233513?

ispidprik

@Jay75 said:

@ispidprik said:

@Jay75 said:
Question lang po. If mag susubmit po ng CDR. ano po occupation categories na nilagay nyo? (Professional Engr, Engineering Tech, Eng'g Associate)

I have 7 years working experience as Design Engineer in manufacturing company.

Failed po kasi ako sa Professional Engr category. Yan kasi advise ng agency.

Anyone here same experience? Thank you!

May we know anong eng’g profession are you applying to get assessed? I’m a mechanical engineer but have planning engineer and maintenance works as the bulk of my experience. But i do have projects which required me to use my M.E skills as per EA and anzsco code. It’s just a matter or framing your career episodes to fit in the requirement and provide proof of mechanical engineering education and qualification sa work. I suggest you revisit your JD vs EA and your nominated anzsco code to verify if you can make it work and apply for professional engineer. Hopebit makes sense and goodluck!

Hi Sir, I'm a Mechanical Design Engineer of airconditioning units.

Medyo nag alangan ako sa assessment ng agency ko na mag apply for Professional Engineer. Which is yung CDR na ginawa ko, sa tingin ko is for engineering associate. Ayun. Pina pa revise ng EA. So ok lang naman sir kahit anong category basta ma assess k ng EA then maRecognize? Thanks

Opinion ko lang nman ito but i maybe wrong. Pero ung HVAC design is M.E. nman tlga in nature. I think bka ndi lang na-frame ng mabuti un CDR to highlight un mga competencies na hinahanap ni EA. The way i see it kasi depende yan sa occupation na hinahabol mo (anzsco code) or occupation na gusto mo inominate.

philipp

Hi fellow engineers, I need your help, paano ang procedure pag-renew ng EA Skills Assessment?

RheaMARN1171933

@philipp said:
Hi fellow engineers, I need your help, paano ang procedure pag-renew ng EA Skills Assessment?

EA skills assessment doesn’t expire but since immigration will only accept up to 3 years since the outcome date, you’ll need to re-instate the letter to make the date current. Thus is explained on the EA website. Hope that helps.

philipp

@RheaMARN1171933
Thank you so much...

Mdave116

Good day fellow engineers. I am a Chemical Engineer with 9+yrs experience.
Just submitted my application for skills assessment last Aug.11 with the fast track option.
Any idea how long will it take for the response of EA?
Thanks in advance for your response.

rejgre03

hi po,
Puede po manghingi ng opinion.
My husband is a Civil Engineer
Work po sya as project manager, may positive skills assessment na sya ng CPM assessed ng Vetasses
Ngayon po, gusto sana mag passess naman for EA with RSEA, (because of points for relevant experience) okay lang po ba na mag passes as professional engineer since 2yrs pa lang sya na PM? And the rest of experience is site engineer? Thank you po

ispidprik

@Mdave116 said:
Good day fellow engineers. I am a Chemical Engineer with 9+yrs experience.
Just submitted my application for skills assessment last Aug.11 with the fast track option.
Any idea how long will it take for the response of EA?
Thanks in advance for your response.

I think nsa 15working days na lang sya sa ngyn.

ispidprik

@rejgre03 said:
hi po,
Puede po manghingi ng opinion.
My husband is a Civil Engineer
Work po sya as project manager, may positive skills assessment na sya ng CPM assessed ng Vetasses
Ngayon po, gusto sana mag passess naman for EA with RSEA, (because of points for relevant experience) okay lang po ba na mag passes as professional engineer since 2yrs pa lang sya na PM? And the rest of experience is site engineer? Thank you po

Sa tingin ko pde nman as long as you can back it up nman with supporting documents and mkabuo sya ng CDR. Goodluck.

Mdave116

@ispidprik said:

@Mdave116 said:
Good day fellow engineers. I am a Chemical Engineer with 9+yrs experience.
Just submitted my application for skills assessment last Aug.11 with the fast track option.
Any idea how long will it take for the response of EA?
Thanks in advance for your response.

I think nsa 15working days na lang sya sa ngyn.

Salamat @ispidprik sa sagot nio po. Hoping na mabilis na ang response nila ngayon. And more importantly, hoping and praying na maging positive ang feedback nila.

lorenzmamangon

How much in peso po magagastos for CDR RSEA Fast track assessment? Nalilito ako sa may two columns. Thanks po

datadash

Sharing my EA MSA CDR timeline para may benchmark ang ibang applicants:

04-AUG: Submitted my MSA CDR application (fast track)
23-AUG: Received a positive outcome letter

No contact with assessor. Your mileage may vary hehe.
I did not expect my application will be this fast.

My occupation and work details are quoted below.

@datadash said:
Hello
Anyone here na registered mechanical engr. and working as a piping design engr na nag pa assess sa EA?

Did you submit CDR only, or CDR+RSEA?

(I am a piping design engr with 8+ yrs of EPC experience in one company)

MARIAFARRAH1

Hello, I am the primary applicant (38 yrs old with IT expi) planning to claim partner points. Husband is 43 yrs old ECE with 15+yrs expi. nid nya pa po ba magRSEA? alam ko po 10 pts max macclaim for partner. thank you.

RheaMARN1171933

@MARIAFARRAH1 said:
Hello, I am the primary applicant (38 yrs old with IT expi) planning to claim partner points. Husband is 43 yrs old ECE with 15+yrs expi. nid nya pa po ba magRSEA? alam ko po 10 pts max macclaim for partner. thank you.

If claiming just partner points no need to have work experience assessed